| Bibliography | Application Areas | Topic Areas |
|---|
| "Status Assessment of Remote Sensing Methods as Applied to Meteorological Parameter Requirements", C. Holton, Program Report #N00014-05-1-0544 (Office of Naval Research, Code 032, Arlington, VA), Virginia Polytechnic & State University, Blacksburg, VA, 12/31/05 | | |
| Ahmadian, J. and Koo, J.H., "Magneto Rheological Tuned Vibration Absorbers: Can They Solve Al Your Vibration Problems?" The 10th International Conference on Electrorheological Fluids and Mangeto-Rheological Suspensions (ERMR 2006), June 18-22, 2006, Lake Tahoe | | |
| Ahmadian, M and Goncalves, F.D., "The Effect of Dwell Time on the Rheological Behavior of MR FLuids," Journal of Modern Physics, | | |
| Ahmadian, M and Inman, D. J., "A Computer Package for the Designa nd Eigenproblem Solution of Damped Linear Multidegree of Freedom Systems," Proceedgins of the Symposium on Advances and Trends in Structural and SOlid Mechanics, Washington DC, October 1982 | Heavy Truck Vehicles | System |
| Ahmadian, M and Inman, D.J., "On the Dynamics of Pseudo-Symmetric Systems," The 23rd Annual Meeting of the Society of Engineering Science, Buffalo NY, August 1986 | | |
| Ahmadian, M and Jeric, K.M., "Effect of Shunted Piezoelectric Materials on Increasing Transmission Loss," Proceedings of SPIE 8th Annual International Symposium on Smart Structures and Materials, Newport Beach CA, March 2001 | | |
| Ahmadian, M and Koo, J.H., "On the Application of Magneto-Rheological (MR) Dampers for Reducing Floor Vibrations," Acoustical Society of America Annual Meeting, Austin TX, November 9-14, 2003 | | |
| Ahmadian, M and Poynor, J.C., "Application of Magneto Rheological Dampers for Controlling Gun Recoil," Proceedings of the Fourth Army Research Office Workshop on Smart Structures, State College PA, August 1999 | | Control |
| Ahmadian, M and Simon, D.E., "An Analytical Experimental Evaluation of Magneto Rheological Suspensions for Heavy Trucks," Proceedings of 17th IUTAM International Symposium on Dynamics of Vehicles on Road and Tracks, Lyngby, Denmark, August 20-24, 2001 | Heavy Truck Vehicles | |
| Ahmadian, M. "Adaptive Control for Industrial Robots," Automated Manufacturing Exhibition and Conference, Greenville SC, November 1986 | | Control |
| Ahmadian, M. and Ahn, Y. K., " Performance Analysis of Magneto-Rheological Mounts," Journal of Intelligent Material Systems and Structures, Vol. 10, No. 3, March 2000, pp. 248-256 | MR Device Technology, Noise, Vibration, and Shock | Design, Modeling |
| Ahmadian, M. and Appleton, R., " On the Design of Magneto-Rheological Recoil Dampers for Fire out of Battery Control," Proceedings of the 10th Gun Dynamics Symposium, Dallas, TX, April 2001. | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Design, Testing |
| Ahmadian, M. and Blancard, E.D., "Non-Dimensional Analysis of the Performance of Semiactive Vehicle Syspensions," Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Infomration in Engineering Conference IDETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas, NV, September 4-7, 2007 | | |
| Ahmadian, M. and Blanchard, E. D., “A Non-dimensional Evaluation of Semiactive Suspensions for Improving Vehicle Ride, Handling, and Stability,” IAVSD, the 20th IUTAM International Symposium on Dynamics of Vehicles on Road and Tracks, Berkeley, CA, August 13 – 17, 2007. | | |
| Ahmadian, M. and Blanchard, E.D., "A Non-Dimensional Evaluation of Semiactive Suspensions for Iproving Vehicle Ride, Handling and Stability," IAVSD, the 20th IUTAM International Symposium on Dynamics of Vehicles on Road and Tracks, Berkeley CA, August 13-17, 2007 | | |
| Ahmadian, M. and Blanchard, E.D., "Ride Performance Analysis of Semiactive Suspension Systems Based on a Full-Car Model," Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas NV, September 4-7, 2007 | | System |
| Ahmadian, M. and Boggs, C.M., "Safety Effects of Operator Seat Design in Large Commercial Vehicles, Project Completion," Transportation Research Board Annual Meeting, Washington DC, January 8-14, 2005 | | |
| Ahmadian, M. and Cantwell, R., "Effect of Pedestal Liner Clearance and Resilience on Rail Vehicle Operation," Proceedings of ASME Rail Transportation Division, Chicago, Illinois, September 1999. | Noise, Vibration, and Shock, Rail Vehicles | Modeling, System |
| Ahmadian, M. and Chou, S. H., "A New Method for Finding the Symmetric Form of Asymmetric Finite- Dimensional Dynamics Systems," ASME Journal of Applied Mechanics, Vol. 54, No. 3, September 1987, pp. 700- 705 | Noise, Vibration, and Shock | Modeling, System |
| Ahmadian, M. and Chou, S.H., "Stability Analysis of Multidimensional Time-Varying Systems," Proceedings of the 10th US National Congress of Applied Mechanics, Austin TX, June 1986 | | System |
| Ahmadian, M. and Delorenzo, M. W., "NUCARS Modeling of Locomotive Bogies," Proceedings of the ASME Rail Transportation Division, Atlanta, Georgia, RTD-Vol. 12, November 1996. | Rail Vehicles | Modeling, System |
| Ahmadian, M. and Dillard, D., “A Preliminary Evaluation and Analysis of Technologies for Eliminating Insulated Joints,” Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5 – 11, 2005. | Rail Vehicles | Design, System |
| Ahmadian, M. and Huang, S.M., "Computational Comparison of Stability Techniques Available for Multiple-Parameter Dynamic Systems," Proceedings of the 10th US National Congress of Appliced Mechanics, Austin TX, June 1986 | | System |
| Ahmadian, M. and Inman, D. J., "On the Stability of General Dynamic Systems Using a Liapunov's Direct Method Approach," Journal of Computers and Structures, Vol. 20, No. 1-3, January 1985, pp. 287-292 | Noise, Vibration, and Shock | Modeling, System |
| Ahmadian, M. and Inman, D. J., "Some Stability Results for General Linear Lumped- Parameter Dynamic Systems," ASME Journal of Applied Mechanics, Vol. 53, No. 1, March 1986, pp. 10-14 | Noise, Vibration, and Shock | Modeling, System |
| Ahmadian, M. and Inman, D.J., "Classical Normal Modes in Asymmetric Non-Conservative Dynamic Systems," AIAA Journal, Vol. 22, No. 7, July 1984, pp. 1012-1015 | Noise, Vibration, and Shock | Modeling, System |
| Ahmadian, M. and Inman, D.J., "Closed-Loop Stability of Large Space Structures with Reduced-Order Controllers," Proceedings of the 5th VPI&SU/AIAA Symposium on Dynamics and Control of Large Structures, Blacksburg VA, June 1985 | | Control |
| Ahmadian, M. and Inman, D.J., "Controlability and Observability of Flexible Gyroscopic Systems," Proceedings of the 21st Annual Meeting of the Society of Engineering Science, Blacksburg VA, October 1984 | | System |
| Ahmadian, M. and Inman, D.J., "Modal Analysis in Non-Conservative Dynamic Systems," Proceedings of the 2nd International Modal Analysis Conference, Orlando FL, February 1984 | | System |
| Ahmadian, M. and Inman, D.J., "On the Nature of Eigenvalues of General Non-Conservative Systems," ASME Journal of Applied Mechanics, Vol. 51, No. 1, March 1984, pp. 193-195 | Noise, Vibration, and Shock | Modeling, System |
| Ahmadian, M. and Inman, D.J., "On the Stability of General Linear Dynamic Systems" Proceedings of the 21st Annual Meeting of the Society of Engineerng Science, Blacksburg VA, October 1984 | | System |
| Ahmadian, M. and Inman, D.J., "Some Stability Results for General Linear Lumped-Parameter Dynamic Systems," ASME Winter Annual Meeting, Miami Beach FL, November 1985 | Heavy Truck Vehicles | System |
| Ahmadian, M. and Jeric, K. M., "The Application of Piezoceramics for Reducing Noise and Vibrations in Vehicle Structures," Proceedings of 1999 SAE Off-Highway Equipment Congress and Exposition, Indianapolis, Indiana, September 1999. | Noise, Vibration, and Shock, Smart Materials | System, Testing |
| Ahmadian, M. and Jeric, K.M., "Effect of Shunted Piezoelectric Materials on Increasing Transmission Loss," Proceedings of SPIE 8th Annual International Symposium on Smart Structures and Materials, Newport Beach CA, March 2001 | | |
| Ahmadian, M. and Koo, J.H., "Magneto Rheological Tuned Vibration Absorbers: Can They Solve All Your Vibration Problems?" The 10th International Converence on Electrorheological Fluids and Magnetorheological Suspensions (ERMR 2006), June 18-22, 2006, Lake Tahoe, USA | | |
| Ahmadian, M. and Koo, J.H., “Magneto Rheological Tuned Vibration Absorbers: Can They Solve All Your Vibration Problems?” The 10th International Conference on Electrorheological Fluids and Magnetorheologial Suspensions (ERMR 2006), June 18-22, 2006, Lake Tahoe, USA. (full paper) | | |
| Ahmadian, M. and Marjoram, R. H., "Effects of Passive and Semi-active Suspensions on Body and Wheelhop Control," SAE Journal of Commercial Vehicles, Vol. 98, 1989, pp.596-604 | Heavy Truck Vehicles, Noise, Vibration, and Shock, Vehicle Suspensions | Modeling |
| Ahmadian, M. and Marjoram, R.H., "Effects of Passive and Semi-active Suspensions on Body and Wheelhop Control," Proceedings of the 1989 SAE Bus and Truck Meeting, SP-802, Charlotte NC, November 1989 | Heavy Truck Vehicles | Design |
| Ahmadian, M. and Mohan, A., "Semiactive Control of Hunting Stability in Rail Vehicles," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando FL, November 5-11, 2005 | | Control |
| Ahmadian, M. and Mohan, A., “Dynamics Analysis of Self-Steering Railway Trucks for Assessing Curving Performance,” Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5 – 11, 2005. | Nonlinear and time-varying systems, Rail Vehicles | Modeling, System |
| Ahmadian, M. and Mohan, A., “Semiactive Control of Hunting Stability in Rail Vehicles” Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5 – 11, 2005. | Nonlinear and time-varying systems, Rail Vehicles | Control, Modeling |
| Ahmadian, M. and Mosch, E. C., "Designing Heavy Truck Suspensions for Reduced Road Damage," Proceedings of the Sixth International Conference on Recent Advances in Structural Dynamics, Southampton, England, July 1997. | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Ahmadian, M. and Pare, K., "A Quarter-Car Experimental Analysis of Alternative Semiactive Control Methods," Journal of Smart Material Systems and Structures, Vol. 11, No. 8, August 2000, pp. 604-612 | Automotive Vehicles, MR Device Technology | Testing |
| Ahmadian, M. and Poynor, J.C., "Application of Magneto Rheological Dampers for Controlling Gun Recoil," Proceedings of the Fourth Army Research Office Workshop on Smart Structures, State College, PA, August 1999 | | Control |
| Ahmadian, M. and Sandu, C. –“An Experimental Validation of Magneto Rheological Front Fork Suspension for Motorcycle Applications”, Special Issue of the Communications in Nonlinear Science and Numerical Simulations Journal (double blind review), in print, Feb. 2007. | MR Device Technology, Vehicle Suspensions | Modeling, Testing |
| Ahmadian, M. and Sandu, C.- "An Experimental Validation of Magneto Rheological Front Fork Suspension for Motorcycle Applications", International Journal of Vehicle Systems Modeling and Testing, accepted Feb. 2008. | Automotive Vehicles | Design |
| Ahmadian, M. and Simon, D.E., "An Analytical Experimental Evaluation of Magneto Rheological Suspensions for Heavy Trucks," Proceedings of 17th IUTAM International Symposium on Dynamics of Vehicles on Road and Tracks, Lyngby, Denmark, August 20-24, 2001 | Heavy Truck Vehicles | |
| Ahmadian, M. and Song, X., "A Non-Parametric Model for Magneto Rheological Dampers," Proceedings of 1999 ASME Design Engineering Technical Conference, Las Vegas, Nevada, September 1999. | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control, Modeling |
| Ahmadian, M. and Song, X., "Effect of System Delay on Semiactive Suspension Performance," Proceedings of the Sixth International Conference on Recent Advances in Structural Dynamics, Southampton, England, July 1997. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Ahmadian, M. and Vahdati, M., "Practical Issues in Quieting Locomotive Cab Interior," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November, 13-19, 2004 | Noise, Vibration, and Shock, Rail Vehicles | Design, Testing |
| Ahmadian, M. and Vahdati, N., "Transient Dynamics of Semiactive Suspensions with Hybrid Control", Journal of Intelligent Material Systems and Structures, Vol. 17, Number 2, February 2006, pp. 145-153. | MR Device Technology, Vehicle Suspensions | Modeling |
| Ahmadian, M. and Vahdati, N., “Transient Dynamics of Semiactive Suspensions with Hybrid Control”, Journal of Intelligent Material Systems and Structures, V17, n 2, Feb 2006, pp. 145-153. | MR Device Technology, Vehicle Suspensions | Modeling |
| Ahmadian, M. and Venezia, J. J., "An Experimental Evaluation of Noise and Vibration in Modern Locomotive Cabs," Proceedings of 2000 IEEE/ASME Joint Rail Conference, Newark, New Jersey , April 2000. | Noise, Vibration, and Shock, Rail Vehicles | Design, Testing |
| Ahmadian, M. and White, D. L., "An Experimental Evaluation of the Effect of Rail Vehicles Truck Suspensions on Wheel-Rail Forces," Proceedings of 1999 IEEE/ASME Joint Rail Conference, Dallas, Texas, April 1999. | Advanced Signal Processing, Rail Vehicles, Vehicle Suspensions | Design, Testing |
| Ahmadian, M. and Yang, S., "Effect of Suspension Nonlinearities on Rail Vehicle Bifurcation and Stability," Proceedings of ASME Rail Transportation Division, 1997 ASME International Congress and Exposition, Dallas, Texas, November 1997. | Nonlinear and time-varying systems, Rail Vehicles, Vehicle Suspensions | Modeling, System |
| Ahmadian, M. and Yang, S., "Effect of System Nonlinearities on Locomotive Bogie Hunting Stability," International Journal of Vehicle System Dynamics, Vol. 29, No. 6, June 1998, pp. 365-384 | Nonlinear and time-varying systems, Rail Vehicles | Modeling |
| Ahmadian, M. and Yang, S., "Hopf Bifurcation and Hunting Behavior in a Rail Wheelset with Flange Contact," Nonlinear Dynamics, Vol. 15, No. 1, January 1998, pp.15-30 | Nonlinear and time-varying systems, Rail Vehicles | Modeling |
| Ahmadian, M. Poynor, J.C., and Goncalves, F. D., "New Technologies for the Railway Industry-Part I," Proceedings of 2001 ASME International Congress and Exposition, New York, New York, November 2001. | MR Device Technology, Rail Vehicles | Design, System |
| Ahmadian, M., "A Comparative Study of Actively Controlled and Shunted Piezoelectric Materials for Structural Damping," Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas NV, September 4-7, 2007 | | Control |
| Ahmadian, M., "A Hybrid Semiactive Control for Secondary Suspension Applications," Proceedings of the Sixth ASME Symposium on Advanced Automotive Technologies, 1997 ASME International Congress and Exposition, Dallas, Texas, November 1997. | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Ahmadian, M., "A New Computational Scheme for Dynamic Analysis of Spinning Spacecraft," Proceedings of the 28th Structures, Structural Dynamics and Materials COnference, Monterey, CA, April 1987 | | |
| Ahmadian, M., "A NUCARS Investigation of the Effect of Pedestal Liner Compliance on Rail Vehicle Hunting," Proceedings of ASME Rail Transportation Division, 1997 ASME International Congress and Exposition, Dallas, Texas, November 1997. | Rail Vehicles | Design, Modeling |
| Ahmadian, M., "A Reflection on Technologies that could Benefit the Railroad Industry," the ASME International Mechanical Engineering Congress and Exposition, Chicago IL, November 5-10, 2006 | | |
| Ahmadian, M., "A Substructural Control Technique of Large Structures," ASME Journal of Vibration and Acoustics, Vol. 115, No. 2, April 1994, pp. 215-221 | Noise, Vibration, and Shock | Control, Modeling |
| Ahmadian, M., "Adaptive Control for Industrail Robots," Automated Manufacturing Exhibition and Conference, Greenville SC, November 1986 | | Control |
| Ahmadian, M., "Controllability and Observability of General Linear Lumped-Parameter Systems," AIAA Journal of Guidance, Control, and Dynamics, Vol. 8, No. 5, November 1985, pp. 669-672 | Noise, Vibration, and Shock | Control, Modeling |
| Ahmadian, M., "Controllability and Observability of General Linear Lumped-Parameter Systems," AIAA Journal of Guidance, Control, and Dynamics, Vol. 8, No. 5, November 1985, pp. 669-672. | Noise, Vibration, and Shock | Control, Modeling |
| Ahmadian, M., "Design and Development of Magneto-Rheological Dampers for Bicycle Suspensions," Proceedings of 1999 ASME International Congress and Exposition, Nashville, Tennessee, November 1999 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Design, System |
| Ahmadian, M., "How Can You Benefit From Working With the Advanced Vehicle Dynamics Laboratory at Virginia Tech?" Business Briefing: Global Truck and Commercial Vehicle Technology, WMRC Publishing, London, UK. January 2001. | Heavy Truck Vehicles | System |
| Ahmadian, M., "Non-Dimensional Analysis of Semiactive Magneto-Rheological Suspensions for Optimizing Vehicle Ride, Handling and Stabilitiy," Keynote Address, The 2nd International Conference on Mechatronics, Kuala Lumpur, Malaysia, May 2005 | | |
| Ahmadian, M., "On the application of Magneto-Rheological fluid technology for improving rail vehicle dynamics," Proceedings of 2002 ASME International Congress and Exposition, New Orleans, LA, November 2002. | MR Device Technology, Rail Vehicles, Vehicle Suspensions | Modeling, System |
| Ahmadian, M., "On the Computational Efficiency of Stability Techniques Applied to Linear Discrete Dynamic Systems," The 27th Structures, Structural Dynamics, and Materials (SDM) Conference, San Antonio TX, May 1986 | | System |
| Ahmadian, M., "On the Development of Fuzzy Skyhook Control for Semiactive Magneto Rheological System," Proceedings of SPIE 2005 Smart Structures and Materials/NDE, San Diego CA, March 6-10, 2005 | | System |
| Ahmadian, M., "On the Isolation Properties of Semiactive Dampers," Journal of Vibration and Control, Vol. 5, No. 2. March 1999, pp. 217-232 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Modeling, System |
| Ahmadian, M., "On the Stability of Multiple-Parameter, Time-Varying, Dynamic Systems," International Journal of Non-Linear Mechanics, Vol. 21, No. 6, June 1986, pp. 483- 488 | Nonlinear and time-varying systems | Modeling, System |
| Ahmadian, M., "On the Time Response of Multidegree-of-Freedom Second-Order Systems," The 22nd Society of Engineerng Science Meeting, State College, PA, October 1985 | | System |
| Ahmadian, M., "On the Virtues of Steerable Locomotive Bogies," Proceedings of ASME Rail Transportation Division, 1997 ASME International Congress and Exposition, Dallas, Texas, November 1997. | Rail Vehicles | Design, System |
| Ahmadian, M., "Ride Evaluation of a Class 8 Truck with Semiactive Suspension," Proceedings of the 1993 ASME Winter Annual Meeting, DSC-52, New Orleans, Louisiana, November 1993. | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Design, Testing |
| Ahmadian, M., "Semiactive Control of Multiple Degree of Freedom Systems," Proceedings of 1997 ASME Design Engineering Technical Conference, Sacramento, California, September 1997. | Automotive Vehicles, MR Device Technology | Control, Modeling |
| Ahmadian, M., "Semiactive Fuzzy Logic Control for Heavy Truck Primary Suspensions: Is it Effective?" SAE Journal of Commercial Vehicles | Biodynamics, Heavy Truck Vehicles, Noise, Vibration, and Shock | Testing |
| Ahmadian, M., "Semiactive Fuzzy Logic Control for Heavy Truck Primary Suspensions: Is it Effective?" Proceedings of the Society of Automotive Engineers Commercial Vehicle Engineering Congress & Exhibition, Chicago IL, November 1-3, 2005 | | |
| Ahmadian, M., "Some Stability Results for Multiple-Parameter Time Varying Systems," Proceedings of the 22nd Annual Meeting of the Society of Engineering Science, The Pennsylvania State University, State College, PA, October 1985 | | System |
| Ahmadian, M., "Stability Results for Lumped Parameter Time-Varying Systems," The 27th Structures, Structural Dynamics, and Materials (SDM) Conference, San Antonio TX, May 1986 | | System |
| Ahmadian, M., "The Challenge of Designing a Semiactive Damper for Heavy Truck Seat Suspensions," Proceedings of the Society of Automotive Engineers Commercial Vehicle Engineering Congress & Exhibition, Chicago IL, November 1-3, 2005 | Heavy Truck Vehicles | Design |
| Ahmadian, M., "The Challenges of Quieting A Freight Locomotive Cab Interior," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | Noise, Vibration, and Shock, Rail Vehicles | Design, Testing |
| Ahmadian, M., "The Latest Trends in Reducing Noise and Vibrations in Large Commercial Vehicles: A Tutorial," Proceedings of 2002 ASME International Congress and Exposition, New Orleans LA, November 2002 | | |
| Ahmadian, M., "The Noise and Vibration Benefits of Soft-Mounted Locomotive Cabs," Proceedings of 2001 IEEE/ASME Joint Rail Conference, Toronto, Ontario, April 2001. | Noise, Vibration, and Shock, Rail Vehicles | Design, Testing |
| Ahmadian, M., "Track Testing of an Innovative Steerable Locomotive Bogie for Heavy Freight Application," Proceedings of the ASME Rail Transportation Division, Atlanta GA, November 1996 | Heavy Truck Vehicles | Control |
| Ahmadian, M., and Ahn, Y.K., "On-Vehicle Evaluation of Heavy Truck Suspension Kinematics," Proceedings of 2003 SAE Truck and Bus Symposium, Fort Worth, TX, November 10-12, 2003 | Heavy Truck Vehicles, Noise, Vibration, and Shock | Testing |
| Ahmadian, M., and Carter, A. K., "Improving Heavy Vehicle Roll Safety by Semiactive Suspensions with Fuzzy Logic Control," Business Briefing: Global Truck and Commercial Vehicle Technology, WMRC Publishing, London, UK, January 2001, pp. 91-92 | Heavy Truck Vehicles, MR Device Technology | Modeling |
| Ahmadian, M., and DeGuilio, A. P., "Recent Advances in the use of Piezoceramics for Vibration Suppression," Shock and Vibration Digest, Vol. 33, No. 1, January 2001, pp. 15- 22 | Noise, Vibration, and Shock, Smart Materials | System |
| Ahmadian, M., and Dhruna, C. J., "Application of Impedance Methods for Predicting Vibrations of a Locomotive Cab," Proceedings of ASME Rail Transportation Division, 1998 ASME International Congress and Exposition, Anaheim, CA, November 1998. | Noise, Vibration, and Shock, Rail Vehicles | System, Testing |
| Ahmadian, M., and Inman, D. J., "On the Stability of Geenral Dynamic Systems Using a Liapunov's Direct Methods Approach," Proceedings of the Symposium on Advances and Trends in Structures and Dynamics, Washington DC, October 1984 | Heavy Truck Vehicles | System |
| Ahmadian, M., and Poynor, J.C., "Effective Test Procedures for Evaluating Force Characteristics of Magneto-Rheological Dampers," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Design, Testing |
| Ahmadian, M., and Simon, D. E., "Improving the Roll Stability of Vehicles with High Center of Gravity by Using Magneto-Rheological Dampers," Proceedings of 2002 ASME International Congress and Exposition, New Orleans, LA, November 2002. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Ahmadian, M., and Simon, D.E., "An Analytical and Experimental Evaluation of Magneto- Rheological Suspensions for Heavy Trucks," International Journal of Vehicle System Dynamics, Vol. 37, No.IAVSD Suppl. 37, 2003, pp. 38-49 | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Testing |
| Ahmadian, M., and Vahdati, N., "An Analytical Evaluation of the Transient Dynamics of Semiactive Dampers," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Ahmadian, M., Appleton, R. and Norris, J.A., "Designing Magneto-Rheological Recoil Dampers in a Fire-out-of Battery Recoil System," 11th Symposium on Electromagnetic Launch Technology, France, May 2002 | | |
| Ahmadian, M., Appleton, R., and Norris, J.A., "An Analytical Study of Fire out of Battery using Magneto Rheological Dampers," Shock and Vibration, Vol. 9, No. 3, June 2002, pp. 129-142 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Testing |
| Ahmadian, M., Appleton, R., and Norris, J.A., "Designing Magneto-Rheological Recoil Dampers in a Fire-out-of Battery Recoil System," IEEE Transactions on Magnetics, Vol. 39, No.1, January 2003, pp. 480-485 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Design |
| Ahmadian, M., Boggs, C.M., "Safety Effects of Operator Seat Design in Large Commercial Vehicles, Project in Progress," Transportation Research Board Annual Meeting, Washington DC, January 10-16, 2004 | | |
| Ahmadian, M., DeGuilio, A.P., Inman, D.J., Claus, R.O., "Application of Smart Damping Materials and Fiber Optic Sensors for Structural Vibration Reduction," 13th Annual Fiber Optics Biomedical Optics Research Review, Blacksburg VA, April 2000 | | |
| Ahmadian, M., Dillard, D.A. and Plaut, R.H., "Jointless Insulated Joint Designs and Performance-Durability Evaluation," Transportion Research Board Meeting, January 22-26, 2006, Washington DC (Presentation only) | | Design |
| Ahmadian, M., Goncalves, F. D., “The Effect of Dwell Time on the Rheological Behavior of MR Fluids,” 10th International Conference on Electrorheological Fluids and Magneto-rheological Suspensions, Lake Tahoe, June 18-22, 2006. (full paper) | | |
| Ahmadian, M., Goncalves, F.D., "A frequency analysis of semi-active control methods for vehicle applications," Proceedings of the SAE Automotive Dynamics, Stability, and Controls Conference and Exhibition, Detroit, MI, May 6-4, 2004 | Automotive Vehicles, MR Device Technology | Control, Testing |
| Ahmadian, M., Goncalves, F.D., "The Effect of Dwell TIme on the Rheological Behavior of MR FLuids," 10th International Conference on Electrorheological FLuids and Magneto-Rheological Suspensions, Lake Tahoe, June 18-22, 2006 | | |
| Ahmadian, M., Goncalves, F.D., "The effect of dwell time on the rheological behavior of MR fluids," 10th International Conference on Electrorheological Fluids and Magneto-rheological Suspensions, Lake Tahoe, June 18-22, 2006 | | |
| Ahmadian, M., Goncalves, F.D., and Sandu, C., "An Experimental Analysis of Suitability of Various Semiactive Control Methods for Magneto Rheological Vehicle Suspensions," Proceedings of SPIE 2005 Smart Structures and Materials/NDE, San Diego CA, March 6-10, 2005 | Heavy Truck Vehicles | Design |
| Ahmadian, M., Goncalves, F.D., and Sandu, C., “An Experimental Analysis of Suitability of Various Semiactive Control Methods for Magneto Rheological Vehicle Suspensions”, Proc. of the 12th SPIE Annual Int. Symposium, Smart Structures and Materials, 9 pages, 6-10 March, 2005, San Diego, CA. | Automotive Vehicles, MR Device Technology | Testing |
| Ahmadian, M., Gravatt, J.W., "A Comparative Analysis of Passive Twin Tube and Skyhook MRF Dampers for Motorcycle Front Suspension," Proceedings of SPIE 2004 Smart Structures and Materials/NDE, San Diego CA, March 14-18, 2004 | | |
| Ahmadian, M., Huang, W., "A Qualitative Analysis of the Dynamics of Self-Steering Locomotive Trucks," International Journal of Vehicle System Dynamics, Vol 37, No 2, February 2002, pp. 85-127 | Rail Vehicles | Design, Modeling |
| Ahmadian, M., Huang, W., "Effect of Self-steering Locomotive Trucks in Improving Adhesion on Curved Tracks," Proceedings of 2000 IEEE/ASME Joint Rail Conference, Newark, New Jersey, April 2000 | Rail Vehicles | Design, Modeling |
| Ahmadian, M., Jeric, K. A., "On the Application of Electrically Shunted Piezoceramics for Increasing Acoustic Transmission Loss in Structures," Journal of Sound and Vibration, Vol. 243, No. 2, May 2001, pp. 347-359 | Noise, Vibration, and Shock, Smart Materials | Testing |
| Ahmadian, M., Jeric, K. A., and Inman, D. J., "An Experimental Evaluation of Smart Damping Materials for Reducing Structural Noise and Vibrations," ASME Journal of Vibration and Acoustics, Vol. 123, October 2001, pp. 533-535 | Noise, Vibration, and Shock, Smart Materials, Vehicle Suspensions | Testing |
| Ahmadian, M., Jeric, K. M., and Inmann, D. J., "An Experimental Evaluation of Smart Damping Materials for Reducing Structural Noise and Vibrations," Proceedings of 1999 ASME Design Engineering Technical Conference, Las Vegas, Nevada, September 1999. | Noise, Vibration, and Shock, Smart Materials, Vehicle Suspensions | System, Testing |
| Ahmadian, M., Jeric, K.M. and Inman, D.J., "Application of Shunted Piezoceramics for Damped and Undamped Strucutres," Proceedings of SPIE 8th Annual International Symposium on Smart Structures and Materials, Newport Beach CA, March 2001 | | |
| Ahmadian, M., Jeric, K.M., and Inman, D.J., "Application of Shunted Piezoceramics for Damped and Undamped Structures," Proceedings of SPIE 8th Annual International Symposium on Smart Structures and Materials, Newport Beach CA, March 2001 | | |
| Ahmadian, M., Kramp, K. P., and Dembosky, M. A., "TRAKVU: A New Tool for Modeling Track Irregularities in NUCARS," Proceedingsof ASME Rail Transportation Division, 1998 ASME International Congress and Exposition, Anaheim, CA, November 1998. | Rail Vehicles | Modeling, System |
| Ahmadian, M., Miller, L. R., Southward, S. C., and Roemer, M. J., “Performance Analysis of Active Mounts for Structural Vibration Reduction,” Recent Advances in Active Control of Sound and Vibration, VPI, Blacksburg, VA, April, 1993. | Noise, Vibration, and Shock | Testing |
| Ahmadian, M., Miller, L.R., Southward, S.C., and Roemer, M.J., "Performance Analysis of Active Mounts for Structural Vibration Reduction," Proceedings of Recent Advances in Active Control of Sound and Vibration, Virginia Polytechnic Institute and State University, Blacksburg VA , April 1993 | | |
| Ahmadian, M., Poynor, J. C., and Gooch, J. M., "Application of Magneto Rheological Dampers for Controlling Shock Loading," Proceedings of 1999 ASME International Congress and Exposition, Nashville, Tennessee, November 1999. | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Design, Testing |
| Ahmadian, M., Poynor, J.C., "An Evaluation of Magneto-Rheological Dampers for Controlling Gun Recoil Dynamics," Shock and Vibration, Vol. 8, Nos. 3 and 4, December 2001, pp. 141-146 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Testing |
| Ahmadian, M., Reichert, B.A. and Song, X., "Harmonic Analysis of Semiactive Suspensions," Proceedings of 1997 ASME Design Engineering Technical Conference, Sacramento, California, September 1997. | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control, Testing |
| Ahmadian, M., Reichert, B.A. and Song, X., "System Non-linearities Induced by Skyhook Dampers, Shock and Vibration, Vol. 8, No. 2, March 2001, pp. 95- 104 | MR Device Technology, Nonlinear and time-varying systems, Vehicle Suspensions | Modeling |
| Ahmadian, M., Seigler, T. M., Clapper, D., and Sprouse, A., "Alternative Test Methods for Long Term Dynamics Effects of Vehicle Seats," Proceedings of 2002 SAE Truck and Bus Symposium, Detroit, MI, November 2002. | Biodynamics, Heavy Truck Vehicles | Design, Testing |
| Ahmadian, M., Seigler, T.M., Clapper, D., and Sprouse, A., "A Comparative Analysis of Air-inflated and Foam Seat Cushions for Truck Seats," Proceedings of 2002 SAE Truck and Bus Symposium, Detriot, MI, November 2002. | Biodynamics, Heavy Truck Vehicles | Design, Testing |
| Ahmadian, M., Seigler, T.M., Clapper, D., and Sprouse, A., "A Comparative Analysis of Air-inflated and Foam Seat Cushions for Truck Seats," SAE Journal of Commercial Vehicles, SP-1730, November 2003 | Biodynamics, Heavy Truck Vehicles | Testing |
| Ahmadian, M., Song, X and Reichert, B.A., "Damping Properties of Magneto-Rheological Fluids," Proceedings of the Third Army Research Office Workshop on Smart Structures," Blacksburg VA, August 1997 | | |
| Ahmadian, M., Song, X and Reichert, B.A., "Semiactive Control of Multibody Systems," Proceedings of the Eleventh Symposium on Structural Dynamics and Control, Blacksburg VA, May 1997 | | Control |
| Ahmadian, M., Song, X and Reichert, B.A., "Semiactive Control of Structural Resonance," Proceedings of the Eleventh Symposium on Structural Dynamics and Control, Blacksburg VA, May 1997 | | Control |
| Ahmadian, M., Song, X. and Reichert, B.A., "Damping Properties of Magneto-Rheologial Fluids," Proceedings of the Third Army Research Office Workshop on Smart Structures, Blacksburg VA, August 1997 | | |
| Ahmadian, M., Song, X. and Reichert, B.A., "Semiactive Control of Structural Resonance," Proceedings of the Eleventh Symposium on Structural Dynamics and Control, Blacksburg VA, May 1997 | | Control |
| Ahmadian, M., Song, X., and Sandu, C., "Designing an Adaptive Semiactive Magneto Rheological Seat Suspension for Heavy Truck Applications," Proceedings of SPIE 2005 Smart Structures and Materials, NDE, San Diego CA, March 6-10, 2005 | Heavy Truck Vehicles | Design |
| Ahmadian, M., Song, X., and Southward, S. C., “No-Jerk Skyhook Control Methods for Semiactive Suspensions,” ASME Journal of Vibration and Acoustics, Vol. 126, No. 4, October 2004, pp. 580-584 | MR Device Technology, Vehicle Suspensions | Control, Testing |
| Ahmadian, M., Song, X., Sandu, C. - “Designing an Adaptive Semiactive Magneto Rheological Seat Suspension for Heavy Truck Applications”, Proc. of the 12th SPIE Annual Int. Symposium, Smart Structures and Materials, 9 pages, 6-10 March, 2005, San Diego, CA. | Heavy Truck Vehicles, MR Device Technology | Control, Design |
| Ahmadian, M., Track Testing of an Innovative Steerable Locomotive Bogie for Heavy Freight Application," Proceedings of the ASME Rail Transportation Division, Atlanta GA, November 1996 | | |
| Ahmadian, M., “A Comparative Study of Actively Controlled and Shunted Piezoelectric Materials for Structural Damping,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas, Nevada, September 4 – 7, 2007. | | |
| Ahmadian, M., “A Reflection on Technologies that could Benefit the Railroad Industry,” the ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5 – 10, 2006. | | |
| Ahmadian, M., “Non-dimensional Analysis of Semiactive Magneto-Rheological Suspensions for Optimizing Vehicle Ride, Handling, and Stability, “Keynote address, The 2nd International Conference on Mechatronics, Kuala Lumpur, Malaysia, May 2005. | | |
| Ahmadian, M., “Semiactive Fuzzy Logic Control for Heavy Truck Primary Suspensions: Is It Effective?” Proceedings of the Society of Automotive Engineers Commercial Vehicle Engineering Congress & Exhibition, Chicago, Illinois, November 1 – 3, 2005. | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Ahmadian, M., “The Challenge of Designing a Semiactive Damper for Heavy Truck Seat Suspensions,” Proceedings of the Society of Automotive Engineers Commercial Vehicle Engineering Congress & Exhibition, Chicago, Illinois, November 1 – 3, 2005. | Heavy Truck Vehicles, Noise, Vibration, and Shock, Vehicle Suspensions | Control, Testing |
| Ahmadian, M.,"Filtering Effects of Mid-Cord Offset Measurements on Track Geometry Data," Proceedings of 1999 IEEE/ASME Joint Rail Conference, Dallas, Texas, April 1999. | Advanced Signal Processing, Rail Vehicles | System |
| Ahmadian, M.,"Laboratory Evaluation of Heavy Truck Dynamics: Are the results useful?" Proceedings of 2003 SAE Truck and Bus Symposium, Fort Worth, TX, November 10-12, 2003 | Heavy Truck Vehicles, Noise, Vibration, and Shock | Testing |
| Ahn, Y. K., Ahmadian, M., and Morishita, S., "On the Design and Development of a Magneto-Rheological Mount," International Journal of Vehicle System Dynamics, Vol. 32, No 2-3, August 1999, pp.199-216 | MR Device Technology, Noise, Vibration, and Shock | Design, Modeling |
| Ahn, Y. K., Ahmadian, M., and Morishita, S., "On the Design and Development of a Magneto-Rheological Mount," Proceedings of the 4th International Symposium on Advanced Vehicle Control, Nagoya, Japan, September 1998. | Automotive Vehicles, MR Device Technology | Design, System |
| Ahn, Y. K., Kim, Y. C., Yang, B. S., and Ahmadian, M., “Optimal Design of Engine Mount Using an Enhanced Genetic Algorithm with Simplex Method,” Vehicle Systems Dynamics, Vol. 43, No 1, February 2005, pp. 57 – 81. (Released June 2005) | MR Device Technology | Modeling |
| Ahn, Y.K., Ha, J.Y., Kim, Y.H. and Yang, B.S., Ahmadian, M., and Morishita, S., "Dynamic Properties of Squeeze Type Mount Using MR Fluid," Journal of Multi-Body Dynamics, Park K, Vol.219, No.1, January 2005, pp. 27-34 | MR Device Technology | System |
| Ahn, Y.K., Kim, Y.C., Yang, B.S. and Ahmadian M., 'Optimal Design of Mount Using an Enhanced Genetic Algorithm and Simplex Method," Proceedings of the 8th International Congress on Sound and Vibration, July 2-6, 2001, Hong Kong, China | | Design |
| Ahn, Y.K., Kim, Y.C., Yang, B.S. and Ahmadian, M., "Optimal Design of Engine Mount Using an Enhanced Genetic Algorithm with Simplex Method," Vehicle Systems Dynamics, Vol. 43, No. 1, February 2005 | | Design |
| Ahn, Y.K., Kim, Y.C., Yang, B.S. and Ahmadian, M., "Optimal Design of Mount Using an Enhanced Genetic Algorithm and Simplex Method," Proceedings of the 8th International Contress on Sound and Vibration, July 2-6, 2001, Hong Kong, China. | | Design |
| Ahn, Y.K., Yang, B.S., Ahmadian, M., and Morishita, S., "A Small-Sized Variable-Damping Mount Using Magneto-Rheological Fluid," Journal of Intelligent Material Systems and Structures, Vol. 16, No. 2, February 2005, pp. 127-133 | MR Device Technology, Vehicle Suspensions | Design |
| Andersen, E. R., Sandu, C., and Southward, S. C., “Multibody Dynamics Modeling and System Identification of a Quarter-Car Test Rig with McPherson Strut Suspension,” SAE COMVEC, 07CV-54, October, 2007 (in review) | Multibody Systems | Modeling |
| Annis, N. A., Southward, S. C., “Scale-Model Test Rig for Passive and Active Suspension Control Comparison,” ASME Int. Design Eng. Tech. Conf., DETC2007-35153, Sept. 2007 (in review) | Automotive Vehicles, Noise, Vibration, and Shock | Control, Design, Modeling, System, Testing |
| Ballew, B., Chan, B.J., Sandu, C., "Three-Piece Half-Truck Multibody Dynamics Models for Freight Train Suspensions," Proceedings of the 2008 IEEE/ASME Joint Rail Conference, April 22-23, 2008 | Rail Vehicles | Modeling |
| Bettig, B., Sandu, C., Joshi, A. and Birru, K – “Dynamic Solver Selection for an Internet Simulation Backbone”, Proc. of the 2003 ACM Symposium on Applied Computing, 8 pages, March 9-13, 2003, Melbourne, FL (doubly blind review process, 3 independent reviewers, 1/3 acceptance rate). | Other | Design, Others |
| Blanchard, E., Sandu, A, and Sandu, C. – “Parameter Estimation Method using an Extended Kalman Filter”, Proc. of the 2007 Asia-Pacific and North America 2007 Regional ISTVS Conference, Paper number PI-083, 15 pages, June 23-26, 2007, Fairbanks, AK | Other | Others |
| Blanchard, E., Sandu, C, and Sandu, A – “A Polynomial-Chaos-based Bayesian Approach for Estimating Uncertain Parameters of Mechanical Systems”, Proc. of the ASME IDETC 2007, 9th Int. Conf. on Advanced Vehicle and Tire Technology (AVTT), Paper number DETC2007-34600, 8 pages, Sept. 4-7, 2007, Las Vegas, NV. | Other | Others |
| Boggs, C. M., Borg, L. T., Ostanek, J. K., and Ahmadian, M., “Efficient Test Procedures for Characterizing MR Dampers,” Proceedings of ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5 – 10, 2006. | | |
| Boggs, C.M. and Ahmadian, M., "Efficient Empirical Modeling of a High-Performance Shock Absorber for Vehicle Dynamics Studies," Proceedings of Society of Automotive Engineers World Congress, April 16-19, 2007 | | Modeling |
| Boggs, C.M. and Ahmadian, M., "Field Study to Evaluate Driver Fatigue Performance in Air-Inflated Truck Seat Cushions-Subjective Results," Proceedings of Society of Automotive Engineers Commercial Vehicle Engineering Congress & Exhibition, Chicago, Illinois, October 25-28, 2004 | Biodynamics, Heavy Truck Vehicles, Noise, Vibration, and Shock | Design, Testing |
| Boggs, C.M. and Ahmadian, M., "Field Study to Evaluate Driver Fatigue Performance in Air-Inflated Truck Seat Cushions-Subjective Results," Proceedings of Society of Automotive Engineers World Congress, April 11-15, 2005 | Biodynamics, Heavy Truck Vehicles | Testing |
| Boggs, C.M., Borg, L.T., Ostanek, J.K. and Ahmadian, M., "Efficient Test Procedures for Characterizing MR Dampers," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Chicago IL, November 5-10, 2006 | | |
| Boggs, C.M., Goncalves, F.D., Ahmadian, M., "Steady-State Energy Transfer of a Semi-Active Suspension under Hybrid Control," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, Novemeber, 13-19, 2004 | Automotive Vehicles, MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control, Testing |
| Chan, B, Thompson, N, Sandu, C, and Dankowicz, H. – “A Novel Tire-soil Interaction Model for Simulation of Off-road Vehicles”, Proc. of the 15th Conference of the ISTVS, 16 pages, Sept. 25-29, 2005, Hayama, Japan. | Terramechanics, Tires | Modeling |
| Chan, B. Sandu, C., and Ahmadian, M., “Development of a Virtual Terramechanics Rig for Experimental Validation,” Proceedings of the Society of Automotive Engineers Commercial Vehicle Engineering Congress & Exhibition, Chicago, Illinois, October 31 – November 2, 2006. | | |
| Chan, B.J and Sandu, C. – “A Ray-tracing Approach to Simulation and Evaluation of a Real-time Quarter Car Model with Semi-active Suspension System using Matlab”, Paper number DETC2003/VIB-48559, Proc. of ASME Int., 19th Biennial Conference on Mechanical Vibration and Noise (VIB), Active and Hybrid Vibration Control Symposium, 6 pages, Sept. 2-6, 2003, Chicago, IL. | Automotive Vehicles | Control |
| Chan, B.J. and Sandu, C. – “A Novel Wheel-Soil Interaction Model for Off-road Vehicle Dynamics Simulation”, Proc. of the ASME IDETC 2007, 9th Int. Conf. on Advanced Vehicle and Tire Technology (AVTT), Paper number DETC2007-34602, 11 pages, Sept. 4-7, 2007, Las Vegas, NV. | Tires | Modeling |
| Chan, B.J. and Sandu, C. – “Development of a Virtual 7-Post Test Rig for Experimental Results Validation”, Proc. of the 2006 ASME Int. Mechanical Engineering Congress and Exposition, 8th VDC Annual Symposium on Advanced Vehicle Technologies, Design Engineering Division, Advances in Vehicle Structural Modeling and Validation, Paper no. IMECE2006-13971, 7 pages, Nov. 5-10, 2006, Chicago, IL. | Automotive Vehicles, Multibody Systems, Noise, Vibration, and Shock | Modeling, Testing |
| Chan, B.J., Sandu, C., and Ahmadian, M. – “Development of a Virtual Terramechanics Rig (VTR) for Experimental Validation”, Proc. of 2006 SAE Commercial Vehicle Engineering Congress and Exhibition, Paper number 06CV-179, 7 pages, Oct 31-Nov 2, Chicago, IL. | Multibody Systems, Terramechanics, Tires | Modeling, Testing |
| Chan, B.J., Sandu, C., and Ahmadian, M., "A Response Spectral Decomposition Approach for the Control of Nonlinear Mechanical Systems," International Journal of Heavy Systems, accepted for publication, in press. | Nonlinear and time-varying systems | Control |
| Chan, B.J., Sandu, C., Streett, T., and Ko, A. – “Modeling and Simulation of an VTOL UAV for Landing Gear Performance Evaluation”, Proc. of the SPIE Defense and Security Symposium, Paper Number SPIE No. 6564-30, 12 pages, Apr. 9-13, 2007, Orlando, FL. | Multibody Systems, Other, Terramechanics | Design, Modeling |
| Christensen, B. G., Ferris, J. B., and Stein, J. L., 2000, "An Energy Enhanced Design of Experiments Method Applied to Multibody Models," Proceedings of the ASME International Congress and Exposition, ASME, Orlando, FL, pp. 527-534. | Vehicle/Terrain Interface | System |
| Christensen, B. G., Ferris, J. B., and Stein, J. L., 2000, "An Energy Enhanced Design of Experiments Method," Proceedings of the ASME International Congress and Exposition, ASME, Orlando, FL, pp. 795-800. | Vehicle/Terrain Interface | System |
| Elahinia, M. and Ahmadianm M., "Application of Time-Domain Identification Techniques for Evaluating Heavy Truck Dynamics," Proceedings of 2003 SAE Truck and Bus Symposium, Fort Worth, TX, November 10-12, 2003 | Advanced Signal Processing, Heavy Truck Vehicles | Modeling |
| Elahinia, M. H. and Ahmadian, M., “An Enhanced SMA Phenomenological Model. Part I. The Shortcomings of the Existing Models,” Journal of Smart Materials and Structures, Vol. 14, December 2005, pp. 1297 – 1308. | Smart Materials | Modeling |
| Elahinia, M. H. and Ahmadian, M., “An Enhanced SMA Phenomenological Model. Part II. The Experimental Study,” Journal of Smart Materials and Structures, Vol. 14, December 2005, pp. 1309 – 1319. | Smart Materials | Testing |
| Elahinia, M. H. and Ahmadian, M., “Application of the Extended Kalman Filter to Control of a Shape Memory Alloy Arm,” Journal of Smart Materials and Structures, Vol. 15, Number 5, October 2006, pp. 1370 – 1384. | Smart Materials | Control |
| Elahinia, M. H. Ashrafiuon, H. and Ahmadian, M., “A Temperature-Based Controller for a Shape Memory Alloy Actuator,” ASME Journal of Vibration and Acoustics, Vol. 127, No. 3, June 2005, pp. 285 – 291. | Smart Materials | Control |
| Elahinia, M. H. Ashrafiuon, M., and Inman, D. "Application of the Extended Kalman Filter to Control of a Shape Memory Alloy Arm," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | Advanced Signal Processing, Smart Materials | Control, Modeling |
| Elahinia, M., Ahmadian, M., and Seigler, T. M., "Application of Parametric Identification Methods for Modeling Heavy Truck Frame Dynamics," ASME 2003 International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | Advanced Signal Processing, Heavy Truck Vehicles | Modeling |
| Elahinia, M., Koo, J. H., and Ahmadian, M., "Robustness Analysis of Shape Memory Alloy Tuned Vibration Absorbers" Proceedings of ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November, 13-19, 2004 | Noise, Vibration, and Shock, Smart Materials | Control, Modeling |
| Elahinia, M., Koo, J.H., and Ahmadian, M. "Improving Robustness of Tuned Vibration Absorbers using Shape Memory Alloys" Shock and Vibration, accepted for publication, in press. | Noise, Vibration, and Shock, Smart Materials | System |
| Elahinia, M., Koo, J.H., and Ahmadian, M., "Expermental Study for Controlling Shape Memory Alloy Actuated Manipulator," 10th Nonlinear Vibrations, Stability and Dynamics of Structures, Blacksburg VA, July 25-29, 2004 | | |
| Elahinia, M., Seigler, T.M., Leo, D.J., Ahmadian, M. "Nonlinear Stress-based Control of a Rotary SMA-actuated Manipulator, Journalof Intelligent Materials Systems and Structures, Vol. 15, No. 6, June 2004, pp.495-508 | Nonlinear and time-varying systems, Smart Materials | Control |
| Elahinia, M.H. and Ahamdian, M., "Application of Time-Domain Indentification Techniques for Evaluating Heavy Truck Dynamics," SAE Journal of Commercial Vehicles, September 2004, pp. 118-129. | Advanced Signal Processing, Heavy Truck Vehicles | System |
| Elahinia, M.H. and Ahmadian M., "Application of Time-Domain Identification Techniques for Evaluating Heavy Truck Dynamics," SAE Journal of Commercial Vehicles, September 2004, pp. 118-129 | Advanced Signal Processing, Heavy Truck Vehicles | System |
| Elahinia, M.H. and Ahmadian, M., "An Enhanced SMA Phenomenological Model. Part II. The Experimental Study," Journal of Smart Materials and Structures, Volume 14, December 2005 | | Modeling |
| Elahinia, M.H. and Ahmadian, M., "An Enhanced SMA Phenomenological MOdel: Part I: The Shortcomings of the Existing Models," Journal of Smar Materials and Structures, Vol. 14, December 2005 | | Modeling |
| Elahinia, M.H. and Ahmadian, M., "Application of the Extended Kalman Filter to Control of a Shape Memory Alloy Arm," Journal of Smart Materials and Structures, Vol. 15, Number 5, October 2006, pp. 1370-1384. | | Control |
| Elahinia, M.H. and Ahmadian, M., "On the Shortcomings of Shape Memory Alloy Phenomenological Models," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November, 13-19, 2004 | Noise, Vibration, and Shock, Smart Materials | Modeling |
| Elahinia, M.H. and Ahmadian, M.and Ashrafiuon, H., "Design of a Kalman filter for rotary shape memory alloy actuators," Journal of Smart Materials and Structures, Vol.13, Number 4, August 2004, pp. 691-697 | Advanced Signal Processing, Smart Materials | Control, Design |
| Elahinia, M.H. and Ashrafiuon, H., Ahmadian, M., and Baumann, W. "Design of Extended Kalman Filter for a Shape memory Alloy Manipulator," Proceedings of the DETC 2003 19th Biennial Conference on Mechanical Vibration and Noise, Chicago, IL, September 2-6, 2003 | Advanced Signal Processing, Smart Materials | Control, Modeling |
| Elahinia, M.H., Ashrafiuon, H. and Ahmadian, M., "A Temperature-Based Controller for a Shape Memory Alloy Actuator," ASME Journal of Vibration and Acoustics, Vol. 127, No. 3, June 2005 | Smart Materials | Control |
| Elahinia, M.H., Henneke, E.G., II, and Ahmadian, M., "Stress-Based Sliding Mode Control of a Rotary SMA-Actuated Manipulator," Proceedings of SPIE 2004 Smart Structures and Materials/NDE, San Diego CA, March 14-18, 2004 | | Control |
| Elahinia, M.H., Koo, J., Ahmadian, M., and Woosley, C. "Backstepping Control of and SMA-Actuated Robotic Arm," Journal of Vibration and Control, March 2005, Vol. 11, No. 3, pp.407- 429 | Smart Materials | Control, Modeling |
| Elahinia, M.H., Koo, J.H., and Ahmadian, M., "Shape Memory Alloy Tuned Vibration Absorbers: Robustness Analysis," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November, 13-19, 2004 | MR Device Technology, Noise, Vibration, and Shock | Design, Testing |
| Elahinia, M.H., Seigler, T.M., Leo, D.J., and Ahmadian, M., "Sliding Mode Control of a Shape Memory Alloy Actuated Manipulator," Proceedings of the 5th International Conference on Intelligent Materials, Pennsylvania State Univeristy, State College PA June 2003 | | Control |
| Emmons, S. G., Boggs, C. M., and Ahmadian, M., “Parametric Modeling of a Highly-Adjustable Race Damper,” Proceedings of ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 5 – 10, 2006. | | |
| Emmons, S.G., Boggs, C.M. and Ahmadian, M., "Parametric Modeling of a Highly-Adjustable Race Damper," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Chicago IL, November 5-10, 2006 | | Modeling |
| Ferris, J. B., 1999, "Factors Affecting Ride Quality in Automobiles," Proceedings of the ASME International Congress and Exposition, ASME, Nashville, TN, pp. 649-654. | Vehicle/Terrain Interface | System |
| Ferris, J. B., 2001, "Singular Value Decomposition of Road Events into Characteristic Shapes," Proceedings of the ASME International Congress and Exposition, ASME, New York, NY. | Vehicle/Terrain Interface | System |
| Ferris, J. B., 2004, "Characterizing Road Profiles as Markov Chains," IJVD, Special Edition on Road Profiles: Measurement, Analysis, and Applications, Vol. 36, No. 2/3. | Vehicle/Terrain Interface | System |
| Ferris, J. B., 2006, "Capturing Planer Tire Enveloping Properties Using Static Constraint Modes," Proceedings of the ASME International Congress and Exposition, ASME, Chicago, IL. | Vehicle/Terrain Interface | System |
| Ferris, J. B., and Estes, H. A., 2002, "Automotive Seat Suspension Model for Ride Quality Studies," Proceedings of the SAE World Congress, paper 2002-01-0778, SAE, Detroit, MI. | Vehicle/Terrain Interface | System |
| Ferris, J. B., and Estes, H. A., 2002, "Automotive Seat Suspension Model for Ride Quality Studies," SAE 2002 Transactions – Journal of Passenger Cars: Mechanical Systems, paper 2002-01-0778, SAE, Detroit, MI, pp. 1130-1135. | Vehicle/Terrain Interface | System |
| Ferris, J. B., and Larsen, J. L., 2001, "Establishing Chassis Reliability Testing Targets Based on Road Roughness," Proceedings of the Seventh ISSAT International Conference on Reliability and Quality in Design, ISSAT, Washington, D.C., pp. 75-79. | Vehicle/Terrain Interface | System |
| Ferris, J. B., and Larsen, J. L., 2002, "Establishing Chassis Reliability Testing Targets Based on Road Roughness," International Journal of Materials & Product Technology, Vol. 17, No. 5/6, pp. 453-461. | Vehicle/Terrain Interface | System |
| Ferris, J. B., and Stein, J. L., 1994, "Development of Proper System Models for Hybrid Systems: A Bond Graph Approach," Proceedings of the 14th IMACS World Congress, IMACS, Atlanta, GA. | Vehicle/Terrain Interface | System |
| Ferris, J. B., and Stein, J. L., 1995, "Development of Proper Models of Hybrid Systems: A Bond Graph Formulation, " Proceedings of the 1995 International Conference on Bond Graph Modeling, SCS, Las Vegas, NV, pp. 43-48. | Vehicle/Terrain Interface | System |
| Ferris, J. B., Bernitsas, M. M., and Stein, J. L., 2000, "Redesigning the Dynamics of Complex Structural Systems," AIAA Journal, Vol. 38, No. 1, pp. 147-154. | Vehicle/Terrain Interface | System |
| Ferris, J. B., Stein, J. L., and Bernitsas, M. M., 1994, "Development of Proper Models of Hybrid Systems," Proceedings of the Symposium on Automated Modeling for Design, 1994 ASME Winter Annual Meeting, ASME, Chicago, IL, pp. 629-636. | Vehicle/Terrain Interface | System |
| Ferris, J. B., Stein, J. L., and Bernitsas, M. M., 1998, "Development of Proper Models of Hybrid Systems," Journal of Dynamic Systems, Measurement, and Control, Vol. 120, No. 3, pp. 328-333. | Vehicle/Terrain Interface | System |
| Frinkle, M., Weir, R., and Ferris, J. B., 2004, "A Graphical Representation of Road Profile Characteristics," Proceedings of the SAE World Congress, paper number 2004-01-0769, SAE, Detroit, MI. | Vehicle/Terrain Interface | System |
| Gellatly, A. W., Peterson, A., Ahmadian, M., and Dingus, T. A., "The Virginia Tech Center for Transportation Research Smart Truck--An Instrumented Heavy Vehicle for Evaluation of Intelligent Transportation Systems," Proceedings of the 1997 SAE International Truck and Bus Meeting and Exposition, Cleveland, Ohio, November 1997. | Heavy Truck Vehicles | Design, System |
| Goncalves F. D., Ahmadian, M., Carlson, J. D. “Investigating the MR effect at high flow velocities,” Smart Materials and Structures, Vol. 15, Issue 1, February 2006, pp. 75 – 85. | MR Device Technology | Testing |
| Goncalves F. D., Koo, J. H., and Ahmadian, “A Review of the State of the Art in Magnetorheological Fluid Technologies – Part I: MR Fluids and MR Fluid Models, Shock and Vibration Digest, accepted for publication, Vol. 38, Number 3, May 2006, pp. 203 – 220. | MR Device Technology, Vehicle Suspensions | System |
| Goncalves, F. D., Ahmadian, M., "Experimental investigation of the energy dissipated in a magnetorheological damper for semi-active vehicle suspensions,"Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., Novemeber 16-21, 2003 | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Goncalves, F. D., Ahmadian, M., Carlson, J. D., “Behavior of MR fluids at high velocities and high shear rates,” International Journal of Modern Physics B, Vol. 19, Nos. 7 – 9, July 2005, pp. 1395 – 1401. | MR Device Technology | Testing |
| Goncalves, F., Koo, J.H., and Ahmadian, M., "Experimental Approach for Finding the Response Time of MR Dampers for Vehicle Applications," Proceedings of the DETC 2003 19th Biennial Conference on Mechanical Vibration and Noise, Chicage, IL, September, 2-6, 2003 | Military Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Goncalves, F.D. and Ahmadian, M., "A study of MR fluids subjected to high shear rates and high velocities," Proceedings of SPIE 2005 Smart Structures and Materials/NDE, San Diego CA, March 6-10, 2005 | | |
| Goncalves, F.D. and Ahmadian, M.,"In Search of a Suitable Control Policy for Intelligent Vehicle Suspensions," Proceedings of 2002 ASME International Congress and Exposition, New Orleans, LA, November 2002. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Goncalves, F.D., Ahmadian, M, and Carlson, J.D., "Behavior of MR fluids at high velocities and high shear rates," Proceedings of the 9th International Conference on electrorheological Fluids and Magneto-rheological Suspensions, Beijing, China, August 29-September 3, 2004 | | |
| Goncalves, F.D., Ahmadian, M., Carlson, J.D., "Behavior of MR Fluids at High Velocities and High Shear Rates," International Journal of Modern Physics B, Vol. 19, Nos 7-9, July 2005 | | |
| Goncalves, F.D., Ahmadian, M., Carlson, J.D., "Investigating the MR Effect at High FLow Velocities," Smart Materials and Structures, Vol. 15, Issue 1, February 2006 | | |
| Goncalves, F.D., and Ahmadian, M., "A Hybrid Control Policy for Semiactive Vehicle Suspensions," Shock and Vibration, Vol. 10, No. 1, January 2003, pp 59-69 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control |
| Goncalves, F.D., Koo, J.H. and Ahmadian, M., "A Review of the State of the Art in Magnetorheological Fluid Technologies--Part I: MR FLuids and MR FLuid Models," Shock and Vibration Digest, Vol. 38, Number 3, May 2006 | | |
| Goncalves, F.D., Wang, J., and Ahmadian, M., "Analytical Evaluationof the Effect of Gap Size on Magneto-Rheological Dampers," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | MR Device Technology, Vehicle Suspensions | Design |
| Gorsich, D. J., Chaika, M., Gunter, D., Karlsen, R., Haueisen, B., Sun, T., Ferris, J. B., 2003, "Terrain Roughness Standards for Mobility and Ultra-Reliability Prediction," Proceedings of the SAE World Congress, SAE, Detroit, MI. | Vehicle/Terrain Interface | System |
| Grecu, E. and Sandu, C. – “Aspects of head - flexible disk interface for a 5.25 in. floppy disk drive”, Romanian J. for Precision Mechanics and Optics, Vol. 2, No. 3, pp 287-290 (4), 1993. | Other | Others |
| Ha, J.Y., Ahn, Y. K., Yang, B.S., Ki, D.J., and Ahmadian, M., "Dynamic properties of Squeeze type mounts using MR fluid," ASME 2003 International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | MR Device Technology, Noise, Vibration, and Shock | Design, Modeling |
| Havendanloo, M., Basirat-Tabrizi, H. and Taheri, S., "Design, Analysis and Construction of a 1/10 Solar Vehicle", Iranian Society of Solar Energy, First Annual Meeting, Tehran, Iran, 1995. | Automotive Vehicles | Design |
| Hou, B., Goncalves, F., Sandu, C., and Ahmadian M. – “Dynamic Simulation of a Full Vehicle with Magneto-Rheological Damper”, Proc. of the ASME IMECE 2004, 6th Annual Symposium on “Advanced Vehicle Technology”, Paper number IMECE2004-59768, 8 pages, Nov. 14-19, 2004, Anaheim, CA. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Hou, B., and Sandu, C. – “Dynamics and Control of a High-speed Transfer Arm”, 10th Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures, July 25-29, 2004, Blacksburg, VA. | Other | Control, Modeling, Others |
| Hou, B., Sandu, C. and Ahmdian, M., "Dynamics and Control of a High-Speed Transfer Arm," 10th Nonlinear Vibrations, Stability and Dynamics of Structures, Blacksburg VA, July 25-29, 2004 | | |
| Huang, W. and Ahmadian, M., "A Qualitative Analysis of the Adhesion Characteristics of Steerable Bo-Bos and Co-Cos," Proceedings of 2001 IEEE/ASME Joint Rail Conference, Toronto, Ontario, April 2001. | Rail Vehicles | Design, Modeling |
| Hull, A. J., Radcliffe, C. J., and Southward, S. C., “Global Active Noise Control of a One-Dimensional Acoustic Duct Using a Feedback Controller,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 115, No. 3, pp. 488-494, September, 1993. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Modeling, System |
| Hull, A. J., Radcliffe, C. J., and Southward, S. C., “Global Active Noise Control of a One-Dimensional Acoustic Duct Using a Feedback Controller,” ASME Winter Annual Meeting, DSC-10, Atlanta, GA, December, 1991, pp. 1-8 | Noise, Vibration, and Shock | Control, Modeling, System, Testing |
| Inman, D. J., Ahmadian, M., and Claus, R. O.,"Simultaneous Active Damping and Health Monitoring of Aircraft Panels," Proceedings of IUTAM 2000 Symposium, Magdeburg, Germany, September 2000. | Noise, Vibration, and Shock, Smart Materials, Vehicle Suspensions | Design, Testing |
| Inman, D.J., Ahmadian, M, and Claus, R.O., "Suppressing Plate Vibrations with Smart Materials," Proceedings of 71st Shock and Vibration Symposium, Arlington VA, November 2000. | | |
| Inman, D.J., Ahmadian, M. and Claus, R.O., "Simultaneous Health Monitoring and Control of Panels," Proceedings of 71st Shock and Vibration Symposium, Arlington VA, November 2000 | | Control |
| Inman, D.J., Ahmadian, M. and Claus, R.O., "Simultaneous Health Monitoring and Control of Panels," Proceedings of 71st Shock and Vibration Symposium, Arlington VA, November 2000 | | Control |
| Inman, D.J., Ahmadian, M. and Claus, R.O., "Suppressing Plate Vibrations with Smart Materials," Proceedings of 71st Shock and Vibration Symposium, Arlington VA, November 2000 | | |
| Inmann, D. J., Ahmadian, M., and Claus, R. O., "Simultaneous Active Damping and Health Monitoring of Aircraft Panels," Journal of Smart Material Systems and Structures, Vol. 12, No. 11, November 2001, pp. 775-783 | Noise, Vibration, and Shock, Smart Materials | Testing |
| Ivers, D. E., Southward, S. C., Heath, M. C., Buchner, S. F., “Active Mounting System Flight Test Results,” InterNoise95, pp. 529-532, July, 1995. | Noise, Vibration, and Shock | System, Testing |
| Jolly, M. R., Rossetti, D. J. and Southward, S. C., “Actuator redundancy in adaptive control systems,” ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, Vol. 75, Novemer, 1994, pp. 19-24 | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Design, System |
| Kern, J. V., and Ferris, J. B., 2006, "Characterizing 2-D Topographic Mappings of Roads," Proceedings of the ASME International Congress and Exposition, ASME, Chicago, IL. | Vehicle/Terrain Interface | System |
| Kern, J. V., and Ferris, J. B., 2006, "Preliminary Results for Model Identification in Characterizing 2-D Topographic Road Profiles," Proceedings of the International Society for Optical Engineering, Defense and Security Symposium, SPIE, Orlando, FL. | Vehicle/Terrain Interface | System |
| Kewley, D. L., Clark, R. L., and Southward, S. C., “Feedforward Control with the Higher-Harmonic Time-Averaged Gradient (H-TAG) Descent Algorithm,” Journal of the Acoustical Society of America, March, 1994. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, System |
| Kewley, D. L., Clark, R. L., Southward, S. C., “Feedforward Control with the Higher-Harmonic Time-Averaged Gradient (H-TAG) Descent Algorithm,” Meeting of the Acoustical Society of America, Denver, CO, Oct., 1993. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Design, System |
| Koo, J. H., Ahmadian, M., Setareh, M., and Murray, T.," In Search of Suitable Control Methods for Semi-Active Tuned Vibration Absorbers," Proceedings of the Ninth Conference of Nonlinear Vibrations, Stability, and Dynamics of Structures, Blacksburg, VA, July 28-August 1, 2002. | MR Device Technology, Noise, Vibration, and Shock | Control, Modeling |
| Koo, J. H., Ahmadian, M., and Setareh, M., "Adaptability Analysis of Semi-Active Tuned Vibration Absorbers for Controlling Floor Vibrations," US-Korea Conference on Science, Technology, and Entrepreneurship, Seoul, Korea, July 2002. | MR Device Technology, Noise, Vibration, and Shock | Control, Modeling |
| Koo, J. H., Ahmadian, M., and Setareh, M., "Experimental Dynamics Analysis of Magneto-Rheological Tuned Vibration Absorbers," Proceedings of the DETC 2003 19th Biennial Conference on Mechanical Vibration and Noise, Chicago, IL, September, 2-6, 2003 | MR Device Technology, Noise, Vibration, and Shock | Control, Testing |
| Koo, J.H. and Ahmadian, M., "A Qualitative Analysis of Groundhook Tuned Vibration Absorbers for Controlling Structural Vibrations," Journal of Multi-body Dynamics, Vol. 216, Part K., February 2002, pp. 351-359 | MR Device Technology, Noise, Vibration, and Shock | Control |
| Koo, J.H. and Ahmadian, M., "Dynamics Analysis of Semi-Active Tuned Vibration Absorbers Using Close-Form Equivalent Models," Proceedings of 2001 ASME International Congress and Exposition, New York, New York, November 2001. | MR Device Technology, Noise, Vibration, and Shock | Control, Modeling |
| Koo, J.H. and Ahmadian, M., "Qualitative Analysis of Magneeto-Rheological Tuned Vibration Absorbers: Experimental Approach," Journal of Intelligent Materials, | | |
| Koo, J.H. and Ahmadian, M., and Elahinia, M.H., "Semi-Active Controller Dynamics in a Magneto-Rheological Tuned Vibration Absorber," Proceedings of SPIE 2005 Smart Structures and Materials/NDE, San Diego CA, March 6-10, 2005 | | |
| Koo, J.H. and Ahmadian, M., “Experimental Robustness Analysis of Magneto-Rheological Tuned Vibration Absorbers Subject to Mass Off-tuning,” ASME Journal of Vibration and Acoustics, -Transactions of the ASME, Vol 128,February 2006, pp. 126 – 131. | MR Device Technology | Testing |
| Koo, J.H., Ahmadain, M., Setareh, M., and Murray, T., "A Robust Semi-Active Tuned Vibration Absorber for Reducing Vibrations in Force- Excited Structrues," Proceedings of 2002 ASME International Congress and Exposition, New Orleans, LA, November 2002. | MR Device Technology, Noise, Vibration, and Shock | Control, Modeling |
| Koo, J.H., Ahmadian, M. Setareh, M. and Murray, T., "In Search of Suitable Control Methods for Semi-Active Tuned Vibration Absorbers," Journal of Vibration and Control, Vol. 10, No. 2, February 2004, pp. 163-174 | MR Device Technology | Control |
| Koo, J.H., Ahmadian, M., and Setareh, M., "An Experimental Evaluation of Magneto-Rheological Dampers for Semi-Active Tuned Vibration Absorbers," Proceedings of SPIE 2003 Smart Structures and Materials/NDE, San Diego CA, March 2003 | | |
| Koo, J.H., Ahmadian, M., and Setareh, M., "Robustness Analysis of Semi-Active Tuned Vibration Absorbers with Magneto-Rheological Dampers: An Experimental Study," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003. | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control, Modeling |
| Koo, J.H., Elahinia, M. Ahmadian, M., and Woosley, C.A.,"Model-Based Nonlinear Control of an SMA-Actuated Robotic Arm: An Experimental Study," Proceedings of the 10th Conferenceon Nonlinear Vibrations, Stability, and Dynamics of Structures, Blacksburg, Virginia, July 25-29, 2004 | Nonlinear and time-varying systems, Smart Materials | Control, Testing |
| Koo, J.H., Goncalves, F. and Ahmadian, M., “A Comprehensive Response Time Analysis of Magneto-Rheological Fluid Dampers,” Smart Materials and Structures, 15 (2006), pp 351 –358. | MR Device Technology | Testing |
| Koo, J.H., Shukla,A. and Ahmadian, M., “Dynamic Performance Analysis of Nonlinear Tuned Vibration Absorbers,” The 1st International Conference on Nonlinear Science and Complexity (NSC 2006), August 7-12, 2006, Beijing, China. | MR Device Technology, Noise, Vibration, and Shock, Nonlinear and time-varying systems | Control |
| Koo, K.H. and Ahmadian, M., "A Comprehensive off-tuning analysis of damping controlled tuned vibration absorbers," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Chicago IL, November 5-10, 2006 | | Control |
| Lane, S. A., Clark, R. L., Southward, S. C., “Active control of low frequency modes in an aircraft fuselage using spatially weighted arrays,” Journal of Vibration & Acoustics-Transactions of the ASME, Vol. 122, No. 3, July 2000, pp. 227-234 | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Modeling, System |
| Langdon, J., and Southward, S. C., “Development of a General Use Quarter-Vehicle Test Rig,” ASME Int. Design Eng. Tech. Conf., DETC2007-35144, Sept. 2007 (in review) | Automotive Vehicles, Heavy Truck Vehicles, Military Vehicles, Multibody Systems, Noise, Vibration, and Shock, Tires | Design, Modeling, Testing |
| Lee, H., Sandu, C., Holton, C., and Ahmadian, M., "An Empirical Approach to Modeling the Friction Coefficient for Wheel-Rail Contact," Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and
Information in Engineering Conference, August 30-September 2, 2009 | Rail Vehicles | Modeling |
| Li, L, Sandu, C. – “Modeling and Simulation of Stochastic Lorenz Systems using a Polynomial Chaos Approach”, Proc. of the ASME IDETC 2007, 6th Int. Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC), Paper number DETC2007-34604, 8 pages, Sept. 4-7, 2007, Las Vegas, NV. | Other | Others |
| Li, L. and Sandu, C. – "On the Impact of Cargo Weight, Vehicle Parameters, and Terrain Characteristics on the Prediction of Traction for Off-Road Vehicles", J. of Terramechanics, JTERRA-D-06-00024, in print, Mar. 2007. | Military Vehicles, Terrain Mapping, Terramechanics | Modeling, System |
| Li, L. and Sandu, C. – “Algorithm for the Prediction of Traction of Terrain Vehicles”, Proc. of the 2006 ASME Int. Mechanical Engineering Congress and Exposition, 8th VDC Annual Symposium on Advanced Vehicle Technologies, Design Engineering Division, Advances in Vehicle Structural Modeling and Validation, Paper no. IMECE2006-13968, 8 pages, Nov. 5-10, Chicago, IL. | Military Vehicles, Multibody Systems, Terrain Mapping, Terramechanics, Tires | Modeling |
| Li, L. and Sandu, C. – “Modeling and Simulation of 2D ARMA Terrain Models for Vehicle Dynamics Applications”, 2007 SAE World Congress, SAE Paper no. 2007-01-0138, 9 pages, Apr. 16-19, 2007, Detroit, MI. | Terrain Mapping | Modeling |
| Li, L. and Sandu, C.- "Modeling and Simulation of 2D ARMA Terrain Models for Vehicle Dynamics Applications", SAE 2007 Transactions Journal of Passengers Cars-Mechanical Systems, V116-6, Paper no. 2007-01-0138, (9), August 2008 | Terrain Mapping | Modeling |
| Li, L. and Sandu, C.- "On the Impact of Cargo Weight, Vehicle Parameters, and Terrain Characteristics on the Prediction of Traction for Off-Road Vehicles", Journal of Terramechanics, JTERRA-D-06-00024, Publisher Elsevier Ltd., DOI 10.1016/j.terra.2007.04.002, pp. 1-18 (18), June 12, 2007, Vol. 44, Issue 3, pp 221-228 (8), 2007. | Vehicle/Terrain Interface | Testing |
| Li, L., Sandu, C., Lee, J., and Liu, Q. – “Development of Tire-on-Stochastic Snow Models Using a Polynomial Chaos Approach”, Proc. of the 2007 Asia-Pacific and North America 2007 Regional ISTVS Conference, Paper number PI-074, 16 pages,June 23-26, 2007, Fairbanks, AK. | Military Vehicles, Terramechanics, Tires | Modeling |
| Li, L., Sandu, C., Reid, A., and Glemming, D. – “Stochastic Modeling of Terrain Profile and Soil Characteristics”, 13th Annual Automotive Research Center Conference, May15-16, 2007, Ann Arbor, MI. | Other, Terrain Mapping, Terramechanics | Modeling, Others |
| Li, L., Sandu, C., Sandu, A. – “Modeling and Simulation of a Full Vehicle with Parametric and External Uncertainties”, Proc. of the 2005 ASME Int. Mechanical Engineering Congress and Exposition, 7th VDC Annual Symposium on "Advanced Vehicle Technologies", Session 4: Advances in Vehicle Systems Modeling and Simulation, Paper number IMECE2005-82101, 6 pages, Nov. 6-11, 2005, Orlando, FL. | Automotive Vehicles, Military Vehicles, Multibody Systems, Terrain Mapping, Terramechanics | Modeling, System |
| Mahdavi, A., and Taheri, S., "Kinematics Analysis of Suspension Mechanisms", Iranian Society of Mechanical Engineers Third Spring Annual Meeting (ISME- SAM), Tehran, Iran, 1995. | Vehicle Suspensions | Modeling |
| Miller, L. R. and Ahmadian, M., "Active Mounts- a Discussion or Future Technological Trends," Proceedings of Internoise-92, Toronto, Canada, July 1992. | Noise, Vibration, and Shock, Smart Materials | Design, Modeling |
| Miller, L. R., Ahmadian, M., Nobels, C. M., and Swanson, S. A., "Modeling and Performance of an Experimental Active Vibration Isolator," ASME Journal of Vibration and Acoustics, Vol. 117, No. 3A, July 1995, pp. 272-278 | Noise, Vibration, and Shock, Smart Materials | Control, Modeling |
| Miller, L. R., Ahmadian, M., Nobles, M. N., and Swanson, D. A., "Modeling and Performance of an Experimental Active Vibration Isolator," Proceedings of the 1992 ASME Winter Annual Meeting, Anaheim, California, November 1992. | Noise, Vibration, and Shock, Smart Materials | Design, Modeling |
| Miller, L.R., Ahmadian, M. and Vahdati, N., "A New Approach to Meeting Engine Vibration Requirements--Active Mounts," Aerotech'92, Anaheim CA, October 1992 | | |
| Mohan, A. and Ahmadian, M., "Nonlinear Investigation of the Effect of Primary Suspension on the Hunting Stability of a Rail Wheelset," Proceedings of the 2004 ASME/IEEE Joint Rail Conference, Baltimore, MD, April 6-8, 2004. | Nonlinear and time-varying systems, Rail Vehicles, Vehicle Suspensions | Modeling, System |
| Mohan, A. and Ahmadian, M., "Nonlinear Investigation of the Effect of Suspension Parameters on the Hunting Stability of Railway Trucks," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November, 13-19, 2004 | Nonlinear and time-varying systems, Rail Vehicles | Modeling, System |
| Mola, K., and Taheri, S., "Dynamic Analysis of the Steering System for a new Van", Iranian Society of Mechanical Engineers Third Spring Annual Meeting (ISME- SAM), Tehran, Iran, 1995. | Automotive Vehicles | Modeling |
| Muecke, K., and Southward, S. C., “Acoustic Beamforming Enhancement of Locomotive Cabin Speech,” Proc. of Joint Rail Conference & Internal Combustion Engine Spring Tech. Conf., JRCICE2007-40102, March, 2007 | Advanced Signal Processing, Noise, Vibration, and Shock, Rail Vehicles | Modeling, Testing |
| Negrut, D., Sandu A., Haug, E.J., Potra F.A. and Sandu, C. – “A Rosenbrock-Nystrom State Space Implicit Approach for the Dynamic Analysis of Mechanical Systems: II - The Method and Numerical Examples”, J. of Multi-body Dynamics, Vol. 217, No. 4, pp. 273-281 (9), Dec. 8, 2003. This paper received 2003 PE Publishing Award from the J. of Multi-body Dynamics. | Military Vehicles, Multibody Systems | Modeling, Others |
| Nobari, A.S. and Taheri, S., "Stability Analysis of a Vehicle", ASME-EDSA, Paris, France, June 1996. | Automotive Vehicles | Modeling |
| Norris, J. A., and Ahmadian, M., "Behavior of Magneto-Rheological Fluids Subjected to Impact and Shock Loading," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | MR Device Technology, Noise, Vibration, and Shock | Design, Testing |
| Norris, M. A., Rossetti, D. J., Southward, S. C., and Sun, J. Q., “A Comparison of Speakers and Structural-Based Actuators for Aircraft Cabin Noise Control,” 2nd Conference on Recent Advances in Active Control of Sound and Vibration, Blacksburg, VA, April, 1993. | Noise, Vibration, and Shock | Control, System, Testing |
| On the Development of a Simulation Model for Tractor Simitrailer Systems with Semiactive Suspensions," Proceedings of the Special Joint Symposium on Advanced Technologies, DSC-Vol 13, ASME Winter Annual Meeting, San Francisco CA, December 1989 | Heavy Truck Vehicles | Design |
| Pare, C. A. and Ahmadian, M., "Experimental Evaluation of Semiactive Magneto-Rheological Dampers for Passenger Vehicles," Proceedings of the 32nd International Symposium on Automotive Technology and Automation (ISATA), Vienna, Austria, June 1999. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Pitman, F.M. and Ahmadian, M., "Some Results on Decentralized Control of Large-Scale Modular Structures," Proceedings of the 6th VPI&SU/AIAA Symposium on Dynamics and Control of Large Structures, Blacksburg VA, June 1987 | | Control |
| Rabani, M., Basirat-Tabrizi, H. and Taheri, S., "Analysis of a Solar Collector Tracking System", ASME-EDSA, Paris, France, June 1996. | Other | Modeling |
| Rabani, M., Basirat-Tabrizi, H. and Taheri, S., "Design of a Computer Controlled Sun Tracking System", First International Solar Energy Conference, Tehran, Iran, 1995. | Other | Design |
| Ramamurthi, K. and Ahmadian, M., "Model Referenced Adaptive Control of a Robot Manipulator," Proceedings of the 1986 International Federation of Automatic Control (IFAC) Symposium on Control of Distributed Parameter Systems, Los Angeles CA, June 1986 | | Control |
| Ramamurthi, K. and Ahmadian, M., "Model Referenced and Learning Model Adaptive Control for a RObotics Manipulator," Proceedings of the 1987 ASME Winter Annual Meeting, Boston MA, December 1987 | Biodynamics | Design |
| Rastgaar-Aagaah, M., Ahmadian, M., and Southward, S. C., "Effect of the Actuators' Location on Vibration Confinement using Minimum Modal Energy Eigenstructure Assignment," ASME Int. Design Eng. Tech. Conf., DETC2007-34962, Sept. 2007 (in review) | Advanced Signal Processing, Noise, Vibration, and Shock | Control |
| Rastgaar-Aagaah, M., Ahmadian, M., and Southward, S. C., “Vibration Confinement by Minimum Modal Energy Eigenstructure Assignment,” ASME Int. Design Eng. Tech. Conf., DETC2007-34961, Sept. 2007 (in review) | Advanced Signal Processing, Noise, Vibration, and Shock | Control |
| Rastgaar-Aagaah, M., Southward, S. C., and Ahmadian, M., "Effect of the Actuators' Location on Vibration Confinement using Minimum Modal Energy Eigenstructure Assignment," Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas, Nevada, September 4 - 7, 2007 | | |
| Richards, R., Sandu, C., and Southward, S. – “Comparison of Static and Dynamic Models for the Force Output of Magnetorheological Dampers”, Proc. of the ASME IDETC 2007, 9th Int. Conf. on Advanced Vehicle and Tire Technology (AVTT), Paper number DETC2007-34603, 8 pages, Sept. 4-7, 2007, Las Vegas, NV. | MR Device Technology, Smart Materials | Modeling |
| Rideout, D. G., Stein, J. L., and Ferris, J. B., 2001, "Target Cascading: A Design Process for Achieving Vehicle Ride and Handling Targets," ASME DSC-9-4, Proc. IMECE 2001 Symposium on Advanced Automotive Technologies, New York. | Vehicle/Terrain Interface | System |
| Rossetti, D J, Jolly, M R, Southward, S C, “On actuator weighting in adaptive control systems,” ASME Dynamic Systems and Control Division, v 57-2, 1995, New York, NY, pp. 843-852 | Advanced Signal Processing, Noise, Vibration, and Shock | Control, System |
| Rossetti, D. J., Jolly, M. R., and Southward, S. C., “Control Effort Weighting in Feedforward Adaptive Control Systems,” J. Acoustical Society of America, Vol. 99, No. 5, p. 2955-2964, May, 1996. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Modeling, System |
| Saeger, K. M., and Ferris, J. B., 2003, "Plausibility Checking of Road Profile Measurements," Proceedings of the SAE World Congress, paper 2003-01-0669, SAE, Detroit, MI. | Vehicle/Terrain Interface | System |
| Saeger, K. M., and Ferris, J. B., 2003, "Plausibility Checking of Road Profile Measurements," SAE 2003 Transactions – Journal of Passenger Cars: Electronic and Electrical Systems, paper 2003-01-0669, SAE, Detroit, MI.
| Vehicle/Terrain Interface | System |
| Sandu, A., Negrut, D., Haug, E.J., Potra F.A. and Sandu, C. - “A Rosenbrock-Nystrom State Space Implicit Approach for the Dynamic Analysis of Mechanical Systems: I - Theoretical Formulation”, J. of Multi-body Dynamics, Vol. 217, No. 4, pp. 263-271 (9), Dec. 8, 2003. This paper received 2003 PE Publishing Award from the J. of Multi-body Dynamics. | Military Vehicles, Multibody Systems | Modeling, Others |
| Sandu, A., Negrut, D., Sandu, C., Haug, E.J. and Potra, F.A. – “Rosenbrock-Nystrom Integrator for SSODE of Mechanical Systems”, Paper number DETC2003/VIB-48329, Proc. of ASME Int., 19th Biennial Conference on Mechanical Vibration and Noise (VIB), Fourth Symposium on Multibody Dynamics and Vibration, 8 pages, Sept. 2-6, 2003, Chicago, IL. | Military Vehicles, Multibody Systems | Modeling, Others |
| Sandu, A., Sandu, C. and Ahmadian, M., "Modeling Multibody Dynamic Systems with Uncertainties. Part I: Theoretical and Computational Aspets," Multibody System Dyanmics, Vol. 15, Number 4, May 2006 | Uncertain Systems, Vehicle Suspensions | Modeling |
| Sandu, A., Sandu, C., and Ahmadian, M. – “Modeling Multibody Dynamic Systems With Uncertainties. Part I: Theoretical and Computational Aspects”, Multibody System Dynamics, Publisher: Springer Netherlands, ISSN: 1384-5640 (Paper) 1573-272X (Online), DOI 10.1007/s11044-006-9007-5, pp. 1-23 (23), June 29, 2006. | Multibody Systems | Modeling |
| Sandu, A., Sandu, C., and Ahmadian, M., "Modeling Multibody Dynamic Systems with Uncertainties. Part II: Numerical Applications," Multibody System Dynamics, Vol. 15, Number 3, April 2006, pp. 241-262. | Uncertain Systems | Modeling |
| Sandu, A., Sandu, C., Chan, B.J., and Ahmadian, M. – “Control of Mechanical Systems using a Parameterized Spectral Decomposition Approach”, Proc. of the ASME IMECE 2004, 6th Annual Symposium on “Advanced Vehicle Technology”, Paper number IMECE2004-60484, 9 pages, Nov. 14-19, 2004, Anaheim, CA. | Multibody Systems, Noise, Vibration, and Shock, Nonlinear and time-varying systems | Control, Modeling |
| Sandu, C. and Freeman, J. – “Connectivity Algorithm and Track Tension Computation for the Extended Flexible-Band Track Model”, Proc. of the 14th Int. Conference of The International Society for Terrain-Vehicle Systems (ISTVS), 10 pages, Oct. 20-24, 2002, Vicksburg, MS. | Military Vehicles, Multibody Systems, Terramechanics | Modeling, System |
| Sandu, C. and Freeman, J. – “Connectivity Algorithm for an Extended Flexible-Band Track Model”, Heavy Vehicle Systems, A Series of the Int. J. of Vehicle Design, Vol. 9, No. 4, pp 333-353 (21), 2002. | Military Vehicles, Terramechanics | Modeling |
| Sandu, C. and Freeman, J. – “Modeling and Simulation of a Military Tracked Vehicle”, 6th U.S. National Congress on Computational Mechanics, Aug. 1-4, 2001, Dearborn, MI. | Military Vehicles, Multibody Systems, Terramechanics | Modeling, System |
| Sandu, C. and Freeman, J.S. – “Analysis of Vehicles Subjective Performance and its Impact on Driving Simulations and Powertrain Design”, Proc. of the 14th Annual Ground Target Modeling and Validation (GTMV) Conference, 15 pages, Aug. 25-28, 2003, Houghton, MI. | Automotive Vehicles, Military Vehicles, Multibody Systems | Modeling, Others, System |
| Sandu, C. and Freeman, J.S. – “Three-Dimensional Multibody Tracked Vehicle Modeling and Simulation”, Paper number DETC2003/VIB-48359, Proc. of ASME Int., 19th Biennial Conference on Mechanical Vibration and Noise (VIB), Fourth Symposium on Multibody Dynamics and Vibration, 9 pages, Sept. 2-6, 2003, Chicago, IL. | Military Vehicles, Multibody Systems, Terramechanics | Modeling, System |
| Sandu, C. – “Lumped Mass Track Model with Rubber Bushings”, 14th U.S. National Congress of Theoretical and Applied Mechanics, Blacksburg, VA, June 23-28, 2002. | Multibody Systems, Terramechanics | Modeling |
| Sandu, C., and Freeman, J. – “Military Tracked Vehicle Model. Part I: Multibody Dynamics Formulation”, Int. J. of Vehicle Systems Modelling and Testing, Vol. 1, Nos. 1/2/3, pp.48-67 (20), 2005. | Military Vehicles, Multibody Systems, Terramechanics | Modeling, System |
| Sandu, C., and Freeman, J. – “Military Tracked Vehicle Model. Part II: Case Study”, Int. J. of Vehicle Systems Modelling and Testing, Vol. 1, Nos. 1/2/3, pp. 216-231 (16), 2005. | Military Vehicles, Multibody Systems, Terramechanics | Modeling, System |
| Sandu, C., Less, D.M. and Truax, J.D. – “Dynamic Performance and Mobility Analysis Workstation for Off-Road Vehicles”, Proc. of the 14th Annual Ground Target Modeling and Validation (GTMV) Conference, 25 pages, Aug. 25-28, 2003, Houghton, MI. | Military Vehicles, Terramechanics | Modeling |
| Sandu, C., Sandu, A., and Ahmadian, M. – “Modeling Multibody Dynamic Systems With Uncertainties. Part II: Numerical Applications”, Multibody System Dynamics, Publisher: Springer Netherlands, ISSN: 1384-5640 (Paper) 1573-272X (Online), DOI: 10.1007/s11044-006-9008-4, Vol. 15, No. 3, pp. 241 - 262 (22), April 2006. | Automotive Vehicles, Military Vehicles, Multibody Systems, Terramechanics | Modeling |
| Sandu, C., Sandu, A., and Li, Lin – “Modeling of Stochastic Terrain Profiles and Soil Parameters”, Proc. of the 2005 SAE Commercial Vehicle Engineering Congress and Exposition, Paper number 2005-01-3559, 10 pages, Nov. 1-3, 2005, Chicago, IL. | Terrain Mapping, Terramechanics | Modeling |
| Sandu, C., Sandu, A., and Li, Lin – “Modeling of Stochastic Terrain Profiles and Soil Parameters”, SAE 2005 Transactions Journal of Commercial Vehicles, V114-2, Paper number 2005-01-3559, pp. 221-220 (10), Feb. 2006. | Terrain Mapping, Terramechanics, Tires | Modeling |
| Sandu, C., Sandu, A., Chan, B.J., and Ahmadian, M. – “A Response Spectral Decomposition Approach for the Control of Nonlinear Mechanical Systems”, Int. J. of Heavy Vehicle Systems, in print July 2006. | Multibody Systems, Noise, Vibration, and Shock | Control |
| Sandu, C., Sandu, A., Chan, B.J., and Ahmadian, M. – “Treating Uncertainties in Multibody Dynamic Systems using a Polynomial Chaos Spectral Decomposition”, Proc. of the ASME IMECE 2004, 6th Annual Symposium on “Advanced Vehicle Technology”, Paper number IMECE2004-60482, 9 pages, Nov. 14-19, 2004 Anaheim, CA. | Multibody Systems, Nonlinear and time-varying systems | Modeling, System |
| Sandu, C., Sandu, A., Chan, B.J., and Ahmadian, M. – “Treatment of Constrained Multibody Dynamic Systems with Uncertainties”, Proc. of the SAE Congress 2005, Paper number 2005-01-0936, 11 pages, April 11-14, 2005, Detroit, MI. | Multibody Systems, Uncertain Systems | Modeling |
| Sandu, C., Sandu, A., Chan, B.J., and Ahmadian, M.- "A Response Spectral Decomposition Approach for the Control of Nonlinear Mechanical Systems", International Journal of Heavy Vehicle Systems, Vol. 15, No 1, (26), 2008. | Nonlinear and time-varying systems | Control |
| Sardar, H and Ahmadian, M., "A Modified Model Referenced Adaptive Control Scheme for Active Vibration Control in Machining," ASME IMECE 96, Materials Division, Atlanta GA, November 1996 | | Control |
| Sardar, H. and Ahmadian, M., "A Modified Model Referenced Adaptive Control Scheme for Active Vibration Control in Machining," ASME IMECE 96, Materials Division, Atlanta GA, November 1996 | | Control |
| Sardar, H. M. and Ahmadian, M., "A Parametric Study of Modified Model Reference Adaptive Control Scheme," ASME Journal of Vibration and Acoustics, Vol. 120, No. 3, Jully 1998, pp. 814-821 | Noise, Vibration, and Shock | Control, Modeling |
| Sardar, H. M., and Ahmadian, M., "A Modified Model Reference Adaptive Control Technique for Nonlinear Dynamic Systems," ASME Journal of Vibration and Acoustics, Vol. 114, April 1992, pp.154-160 | Noise, Vibration, and Shock | Control, Modeling |
| Seigler, M., Elahinia, M.H., Leo, D.J. and Ahmadian, M., "Stress Based Control of a Single-degree-of-freedom SMA-actuated Arm," Proceedings of the 5th International Conference on Intelligent Materials, Pennsylvania State University, State College PA, June 2003. | | Control |
| Seigler, M., Elahinia, M.H., Leo, D.J., and Ahmadian, M., "Stress Based Control of a Single-degree-of-freedom SMA-actuated Arm," Proceedings of the 5th International Conference on Intelligent Materials, Pennsylvania State University, State College PA, June 2003 | | Control |
| Seigler, T., M. and Ahmadian, M., "Evaluation of an Alternative Seating Technology for Truck Seats," International Journal of Heavy Vehicle Systems, Volume 10, No. 3, August 2003, pp.188-208 | Biodynamics, Heavy Truck Vehicles | System |
| Seigler, T., M., Ahmadian, M., Boggs, C.M., "Validation of an Indenter System for Evaluating Truck Seat Cushions," Journal of Automobile Engineering, Vol. 217, No. 5, May 2003, pp. 343-348. | Biodynamics, Heavy Truck Vehicles | Design |
| Setareh, M., Ritchey, J.K., Murray, T.M. Koo, J.H., and M. Ahmadian,"An Analytical Investigation of the Use of a Semi-Active Pendulum Tuned Mass Damper for Floor Vibration Control" The Seventh International Conference on Motion and Vibration Control, Paper No. 104, St. Louis, MO, August 8-11, 2004 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Modeling |
| Shimp, S. K. III, Southward, S.C., and Ahmadian, M., “Detecting Crew Alertness with Processed Speech,” Proceedings of JRCICE2007, 2007 ASME/IEEE Joint Rail Conference & Internal Combustion Engine Spring Technical Conference, Pueblo, Colorado, March 13 – 16, 2007. | | |
| Shimp, S., Southward, S. C., and Ahmadian, M., “Detecting Crew Alertness with Processed Speech,” Proc. of Joint Rail Conference & Internal Combustion Engine Spring Tech. Conf., JRCICE2007-40101, March, 2007 | Advanced Signal Processing, Noise, Vibration, and Shock, Rail Vehicles | Others |
| Shimp, S.K.III, Southward, S.C. and Ahmadian, M., "Detecting Crew Alertness with Processed Speech," PRoceedings of JRCICE2007, 2007 ASME/IEEE Joint Rail Conference, Pueblo CO, March 13-16. 2007 | | |
| Simon, D. E. and Ahmadian, M., "Application of Magneto-Rheological Dampers for Heavy Truck Suspensions," Proceedings of the 32nd International Symposium on Automotive Technology and Automation (ISATA), Vienna, Austria, June 1999. | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Control, Testing |
| Simon, D. E. and Ahmadian, M., "On the Design of an Intelligent Suspension for Controlling Passenger Vehicle Roll Stability," Proceedings of 2002 ASME International Congress and Exposition, New Orleans, LA, November 2002. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Simon, D. E. and Ahmadian, M., "Vehicle Evaluation of the Performance of Magneto Rheological Dampers for Heavy Truck Suspensions," ASME Journal of Vibration and Acoustics, Vol. 123, No. 3, July 2001, pp. 365-375 | Heavy Truck Vehicles, MR Device Technology, Vehicle Suspensions | Testing |
| Simon, D. E., and Ahmadian, M., "An Alternative Semiactive Control Method for Sport Utility Vehicles," Journal of Automobile Engineering, Vol. 216, Part D, April 2002, pp. 125-139 | Automotive Vehicles, MR Device Technology, Noise, Vibration, and Shock | Control |
| Song, X, Ahmadian, M. and Southward, S.C. "Adaptive Skyhook Control for Magneto-Rheological Suspension Systems," Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineerng Conference IDETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas NV, September 4-7, 2007 | | |
| Song, X, Ahmadian, M., Southward, S.C. and Miller, L, "An Adaptive Semiactive Control Algorithm for Magneto-Rheological Suspension Systems," ASME Journal of Vibration and Acoustics, Vol. 127, No. 5, October 2005 | MR Device Technology, Vehicle Suspensions | Control, Testing |
| Song, X, Ahmadian, M., Southward, S.C. and Miller, L., "Adaptive Skyhook Control for Magneto-Rheological Suspension Systems," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando FL, November 5-11, 2006 | | Control |
| Song, X., Ahmadian, M. and Southward, S.C., "Modeling Magneto-Rheological Dampers with Application of Nonparametric Approach," Journal of Intelligent Material Systems and Structures, Vol. 16, No. 5, May 2005 | MR Device Technology, Vehicle Suspensions | Modeling |
| Song, X., Ahmadian, M. Southward, S.C. and Miller, L., "Superharmonic-Free Adaptive Semiactive Magneto-Rheological Suspension," Proceedgins of ASME International Mechanical Engineering Congress and Exposition, Orlando FL, November 5-11, 2005 | | |
| Song, X., Ahmadian, M., and Southward, S. C., “Adaptive Skyhook Control for Magneto-Rheological Suspension Systems,” ASME Int. Design Eng. Tech. Conf., DETC2007-34041, Sept. 2007 (in review) | Advanced Signal Processing, MR Device Technology, Noise, Vibration, and Shock, Smart Materials | Control, System |
| Song, X., Ahmadian, M., and Southward, S. C., “An Adaptive Semiactive Control Algorithm for Vehicle Suspension Systems,” IMECE 2003-43566, Proceedings of ASME IMECE 2003, November 15-21 2003, Washington, D.C.,
Vol. 116, No. 1, pp. 219-228 | Advanced Signal Processing, Automotive Vehicles, MR Device Technology, Noise, Vibration, and Shock, Smart Materials, Vehicle Suspensions | Control, Modeling, System, Testing |
| Song, X., Ahmadian, M., and Southward, S. C., “Eliminating the Unwanted Dynamics from the Controllable Suspensions for Vehicle Applications,” Transportation: Making Tracks for Tomorrow's Transportation, 2002, pp. 131-137 | Advanced Signal Processing, MR Device Technology, Noise, Vibration, and Shock, Smart Materials | Control, Modeling, System |
| Song, X., Ahmadian, M., and Southward, S. C., “Modeling Magneto-Rheological Dampers with Application of Non-Parametric Approach,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 5, May 2005, pp. 421-432 | MR Device Technology, Smart Materials, Vehicle Suspensions | Modeling |
| Song, X., Ahmadian, M., and Southward, S. C., “Parametric study of nonlinear adaptive control algorithm with magneto-rheological suspension systems,” Comm. In Nonlinear Science and Numerical Simulation, V 12, No. 4, July, 2007, pp. 584-607 | Advanced Signal Processing, MR Device Technology, Noise, Vibration, and Shock, Smart Materials | Control |
| Song, X., Ahmadian, M., and Southward, S.C., “Adaptive Skyhook Control for Magneto-Rheological Suspension Systems,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2007, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas, Nevada, September 4 – 7, 2007. | | |
| Song, X., Ahmadian, M., Southward, S. C., and Miller, L. R., “An Adaptive Semiactive Control Algorithm for Magneto-Rheological Suspension Systems,” ASME Journal of Vibration and Acoustics, Vol. 127, No. 5, October 2005, pp. 493-502 | Advanced Signal Processing, MR Device Technology, Noise, Vibration, and Shock, Smart Materials | Control, System, Testing |
| Song, X., Ahmadian, M., Southward, S. C., and Miller, L. R., “Simulation Study of Adaptive Magneto-Rheological Seat Suspension,” ASME IMECE 2004-59588, November 14-19, Anaheim, CA, 2004, Vol. 117, pp. 385-395 | Advanced Signal Processing, MR Device Technology, Noise, Vibration, and Shock, Smart Materials, Vehicle Suspensions | Control, Modeling, System |
| Song, X., Ahmadian, M., Southward, S. C., and Miller, L. R., “Superharmonics-free adaptive semiactive magneto-rheological suspension,” ASME Design Engineering Division, Vol. 118A, No. 1, 2005, pp. 41-52 | Advanced Signal Processing, MR Device Technology, Noise, Vibration, and Shock, Smart Materials | Control, System |
| Song, X., Ahmadian, M., Southward, S.C. and Miller, L., "Parametric Study of Nonlinear Adaptive Control Algorithm with Magneto-Rheological Suspension Systems," Communications in Nonlinear Science and Numerical Simulation, Vol. 12, Number 4, July 2006, pp. 584-607. | MR Device Technology, Nonlinear and time-varying systems, Vehicle Suspensions | Control |
| Song, X., Ahmadian, M., Southward, S.C., and Miller, L., "Adaptive Skyhook Control for Magneto-rheological Suspension Systems", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 5-11, 2005 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control |
| Song, X., Ahmadian, M., Southward, S.C., and Miller, L., “Parametric Study of Nonlinear Adaptive Control Algorithm with Magneto-Rheological Suspension Systems”, Communications in Nonlinear Science and Numerical Simulation, Vol. 12, Number 4, July 2006, pp. 584 - 607. | | |
| Song, X., and Ahmadian, M., "Study of Semiactive Adaptive Control Algorithms with Magneto-Rheological Seat Suspension", SAE 2004-01-1648, Society of Automotive Engineers World Congress, Detroit, MI, March 7-12, 2004 | MR Device Technology, Noise, Vibration, and Shock, Vehicle Suspensions | Control, Modeling |
| Song, X., and Ahmadian, M., 'Characterize Semiactive Adaptive Control Algorithms with Application of Magneto-Rheological Dampers', Journal of Vibration and Control, accepted for publication, in press. | Automotive Vehicles, MR Device Technology, Vehicle Suspensions | Control, Modeling |
| Southward, S. C., and Radcliffe, C. J., “A Property of Stick-Slip Friction Models which Promotes Limit Cycle Generation,” ASME American Control Conference, San Diego, CA, January, 1990, pp. 1198-1203 | Noise, Vibration, and Shock | Control, Modeling, Testing |
| Southward, S. C., and Radcliffe, C. J., “Control and Observation of the Inverted Pendulum,” ASME Computers In Engineering, Chicago, IL, July, 1986. | Other | Control, Modeling, System, Testing |
| Southward, S. C., Heath, M. C., and Ferguson, M. K., “A Hybrid LMS Implementation for Tonal Noise Cancellation,” Proc. of Active 95, Newport Beach, CA, July, 1995. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Design, System |
| Southward, S. C., Ivers, D. E., Nicholson, G., “Commercialization of Active Isolation for Jet Aircraft,” Invited Paper, 16th Biennial Conf. on Mechanical Vibration and Noise, Sacramento, CA, September, 1997. | Noise, Vibration, and Shock | Control, System, Testing |
| Southward, S. C., Radcliffe, C. J., and MacCluer, C. R., “Robust Nonlinear Stick-Slip Friction Compensation,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, No. 4, pp. 639-645, December, 1991. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Modeling, System |
| Southward, S. C., Radcliffe, C. J., and MacCluer, C. R., “Robust Nonlinear Stick-Slip Friction Compensation,” ASME Winter Annual Meeting, DSC-8, Dallas, TX, November, 1990. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Design, System |
| Southward, S. C., “Centralized vs. Decentralized: Optimal Steady-State Tonal Control for Multi-Channel Systems,” ASME Winter Annual Meeting, DSC Vol. 38, Anaheim, CA, November, 1992, pp. 327-330 | Noise, Vibration, and Shock | Control, Design, System |
| Southward, S. C., “Filter Length Sizing for the Filtered-x LMS Algorithm in Large MIMO Tonal Noise Cancellation Systems,” ASME International Mechanical Engineering Congress and Exposition, Vol. 75, Chicago, IL, November, 1994, pp. 389-393 | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Design |
| Southward, S. C., “Real-Time Parameter ID Using Polynomial Chaos Expansions,” ASME Int. Mech. Eng. Congress and Expo., IMECE2007-43745, Nov. 2007 (in review) | Other | Modeling, System |
| Sperry, B., Sandu, C., and Ballew, B., "Complex Bogie Modeling Incorporating Advanced Friction Wedge Components," Proceedings of the 2009 ASME Joint Rail Conference, March 3-5, 2009 | Rail Vehicles | Modeling |
| Steets, J., Chan, B., and Sandu, C. – “A Multibody Dynamics Approach to Friction Wedge Modeling for Freight Train Suspensions”, Proc. of the 2007 Annual ASME/IEEE Joint Rail Conference (JRC) and Internal Combustion Engine Spring Technical Conference, Paper number JRCICE2007-40050, 11 pages, Mar. 13-16, 2007, Pueblo, CO. | Rail Vehicles | Modeling |
| Sun, T. C., Alyass, K, Wei, J., Gorsich, D. J., Chaika, M., Ferris, J. B., 2005, "Time Series Modeling of Terrain Profiles," Proceedings of the SAE World Congress, paper number 2005-01-3561, SAE, Detroit, MI. | Vehicle/Terrain Interface | System |
| Taheri, S. and Khandani, H., "A New Load and Speed Sensitive Non-linear Control Algorithm for Intelligent Vehicle Highway Systems (IVHS)", IASTED Conference on Application of Control, Orlando, Florida, 1995. | Automotive Vehicles | Control |
| Taheri, S. and Law, E.H., "Investigation of a Combined Slip Control Braking System and Closed Loop Four Wheel Steering System for an Automobile During Combined Hard Braking and Severe Steering", American Control Conference, May 23-25, 1990, Sandiego, California. | Automotive Vehicles | Control |
| Taheri, S. and Law, E.H., "Slip Control Braking of an Automobile During Emergency Maneuvers", ASME WAM, Atlanta, Georgia, 1991. | Automotive Vehicles | Control |
| Taheri, S. and Mahdavi, A., "Optimizing Vehicle Suspension System", Journal of Amirkabir University of Technology, No. 3 1995. | Vehicle Suspensions | Modeling |
| Taheri, S. and Rafezi, S. "Design of a Multi Link Rear Axle Independent Suspension System", Iranian Society of Mechanical Engineers Third Spring Annual Meeting (ISME- SAM), Tehran, Iran, 1995. | Vehicle Suspensions | Design |
| Taheri, S., "A Feasibility Study of a New Non-linear Control Law for Automobile Anti-Lock Braking System", Transportation Systems, ASME WAM, AMD-Vol. 108, pp. 43-49, 1990. | Automotive Vehicles | Control |
| Taheri, S., "An Alternate Control Algorithm for Four Wheel Steering Vehicles", Supplement to vehicle System Dynamics Journal, Volume 23, 1993. | Automotive Vehicles | Control |
| Taheri, S., "Electric Vehicles and Their Impact on the Environment", Industrial Committee Bulletin, No. 13, 1995. | Automotive Vehicles | Others |
| Taheri, S., "Four Wheel Steering Control Strategies", Iranian Society of Mechanical Engineers First Spring Annual Meeting (ISME- SAM), Tehran, Iran, 1993. | Automotive Vehicles | Control |
| Taheri, S., "Four-Wheel Steering-How Good is it?", Fifth World-Wide Vehicle Dynamics Conference, Ford Motor Company, October 1990. | Automotive Vehicles | Control |
| Taheri, S., Bahrami, M., and Kaynejad, F., "A Seventeen DOF Non-linear Vehicle Dynamic Simulation", ASME-EDSA, Paris, France, June 1996. | Automotive Vehicles | Modeling |
| Taheri, S., Darvishi, M. and Bahrami, M. "A New Control Strategy for Anti-lock Braking Systems ", SAE paper #980247, 1998. | Automotive Vehicles | Control |
| Taheri, S., Darvishi, M., and Bahrami, M., "A New Control Strategy for Anti-lock Braking Systems", SAE Transactions, Journal of Passenger Cars, Vol. 107, No 6, 1998. | Automotive Vehicles | Control |
| Taheri, S., Hamedi, B., and Lotfi, B., "Optimization of Vehicle Suspension using BOX's Method", Presented at the Iranian Society of Mechanical Engineers Fifth Spring Annual Meeting (ISME- SAM), Tabriz, Iran, 1997. | Vehicle Suspensions | Modeling |
| Taheri, S., Khandani, H. and Gaffari-Saadat, M.H., "Controller Design for a Three-Car Caravan", Iranian Society of Mechanical Engineers Third Spring Annual Meeting (ISME- SAM), Tehran, Iran, 1995. | Automotive Vehicles | Control |
| Taheri, S., Mula, K. and Gaffari-Saadat, M.H., "Dynamic Modeling of Power Steering System Using Bond Graphs", FISITA Conference, 1994, China. | Automotive Vehicles | Modeling |
| Taheri, S., Mula, K. and Gaffari-Saadat, M.H., "Modeling Power Steering System", ASME-EDSA, London, England, 1993. | Automotive Vehicles | Modeling |
| Taheri, S., Nesari, J., "A New Optimal Sliding Mode Nonlinear Control Strategy for Anti-lock Braking Systems”, 17th IASTED Conference, 1997. | Automotive Vehicles | Control |
| Tran, C. M., and Southward, S. C., “A Sensor Placement Strategy for the Hybrid Adaptive Feedforward Observer,” Journal of Dynamic Systems, Measurement, and Control, Trans. Of ASME, Vol. 128, No. 2, June, 2006, pp. 449-452 | Advanced Signal Processing, Noise, Vibration, and Shock | Control |
| Tran, C. M., and Southward, S. C., “A Virtual Sensing Method for Tonal ANVC Systems,” Journal of Dynamic Systems, Measurement, and Control, Vol. 124, No. 1, pp. 35-40, March, 2002. | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Modeling, System |
| Tran, C. M., and Southward, S. C., “Stability and Convergence of a Hybrid Adaptive Feedforward Observer,” AIAA Journal of Guidance, Control, and Dynamics, Vol. 26, No. 1, pp. 189-192, January, 2003 | Advanced Signal Processing, Noise, Vibration, and Shock | Control, Modeling |
| Tuzcu, I. and Ahmadian, M., " Delay-Independent Stability of Uncertain Control Systems," ASME Journal of Vibration and Acoustics, Vol. 124, No. 2, April 2002, pp. 277-283 | Noise, Vibration, and Shock, Uncertain Systems | Modeling |
| Vahdati, N. and Ahmadian, M., "Hybrid Secondary Suspension Systems," Shock and Vibration | Automotive Vehicles, MR Device Technology | System |
| Vahdati, N. and Ahmadian, M., "Variable Volumetric Stiffness Fluid Mount Design," Shock and Vibration, Vol. 11, Number 1, January 2004, pp.21-32 | MR Device Technology, Noise, Vibration, and Shock | Design |
| Vahdati, N., and Ahmadian, M., "Single Pumper Semi-active Fluid Mount," ASME 2003 International Mechanical Engineering Congress and Exposition, Washington, D.C., November 16-21, 2003 | MR Device Technology, Noise, Vibration, and Shock | Design, Modeling |
| Wei, H. and Ahmadian, M., "What Role does the Steerable Linkage Stiffness Play in the Operation of a Steerable Truck? Proceedings of ASME Rail Transportation Division, Chicago, Illinois, September, 1999. | Rail Vehicles | Design, System |
| Worley, M., Ping, R., Sandu, C., and Hong, D. – “The Development of an Assessment Tool for Mobility of Lightweight Autonomous Vehicles on Coastal Terrain”, Proc. of the SPIE Defense and Security Symposium, Paper Number SPIE No. 6564-24, 12 pages, Apr. 9-13, 2007, Orlando, FL. | Military Vehicles, Terramechanics | Others, Testing |
| Worley, M., Sandu, C., and Ahmadian, M. – “Vehicle Dynamics Simulation in Dymola Software”, 2nd Annual Virginia Tech Undergraduate Research and Potential Graduate Student Conference, April 13, 2004, Blacksburg, VA. | Automotive Vehicles, Other | Modeling, Others |
| wvwefwkklmewflkmefwklmfewklmfewlkmefwlkmwfelkmfwe | Heavy Truck Vehicles | Control |
| Yang, S. and Ahmadian, M., "Analysis of Hopf Bifurcation in Rail Vehicle Dynamics," Proceedings of the Third European Nonlinear Oscillations Conference (ENOC), Copenhagen, Denmark, August 1999 | | |
| Yang, S. and Ahmadian, M., "Nonlinear Analysis of Hunting Stability in High-Speed Rail Vehicles," Proceedings of the ASME Rail Transportation Division, Atlanta, Georgia, November 1996. | Nonlinear and time-varying systems, Rail Vehicles | Modeling, System |
| Zekevat, S.A., Sandu, C., Archer, G. and Hungwe, K. - “A Preliminary Study on Shortcomings of the Interdisciplinary Course “Electrical Engineering for Non-Majors””, Proc. of ASEE Conference, 15 pages, June 2004, Salt Lake City, UT. | Other | Others |
| Ziegenmeyer, J., and Southward, S. C., “Real-Time Open-Loop Estimation of Disturbance Inputs to a Quarter-Car Model,” ASME Int. Mech. Eng. Congress and Expo., IMECE2007-43769, Nov. 2007 (in review) | Advanced Signal Processing, Automotive Vehicles, Multibody Systems, Noise, Vibration, and Shock | Control, Modeling, System |
| “60mW 1.5um Single Frequency Low Noise Fibre Laser MOPA”, G. Ball, C. Holton, G. Hull-Allen, W. Morey, Photonics Technology Letters, February, 1994 | | |
| “A Computer Program for Simulation of Underwater Laser Viewing and Detection Systems”, NOLTR-73-170, November 1973 | | |
| “A Method for Infrared Analysis of CO and CO2 Concentrations in Sealed-Off CO2 Discharge Tubes”, C. Holton, Master Thesis, University of Maryland, 1973 | | |
| “A New Fiber Optic-Based Approach to Meteorological Instrumentation”, W. Erxlaben. W. Stein, C. Holton, M. Parker, American Meteorological Society 80th meeting, Albuquerque, January, 2001 | | |
| “An Optically Active Diffraction Device for a High Efficiency Light Valve”, P. Bos, J. Chen, J. Doane, C. Holton, W. Glenn, B. Smith, SID Symposium 26.2, Orlando, FL, May 25, 1995 | | |
| “CO2 Laser Radar Source Program”, United Technologies Research Center (internal document), East Hartford, CT, 1985 (co-Author) | | |
| “Colloidal Quantum dots Entrained in Micro-structured Optical Fibers”, C. Holton, K Meissner, E. Herz, D Kominsky, G. Pickrell, SPIE Photonics West, 5335-41, San Jose, CA, January 2004 | | |
| “Continued Development of a New Influence Technique for a Torpedo Warhead Exploder”, NSWC/WOL/TR-76-128, December 1976 (primary author) | | |
| “Design for a Comprehensive Optical Atmospheric Monitoring System”, M.J. Parker, C. Holton, 11th Joint Conference on the Applications of Air Pollution Meteorology, American Meteorological Society/Air & Waste Management Assoc., Long Beach, CA, January, 2000 | | |
| “Efficient Liquid-Crystal Light Valves”, W. Glenn, C. Holton, G.J. Dixon, IS&T/SPIE Symposium on Electronic Imaging: Science and Technology, SPIE Vol. 2407, pgs 198-213, San Jose, CA., February 10, 1995 | | |
| “Efficient, Polarization-Independent Reflective Liquid-crystal Phase Gratings”, C. Titus, P. Bos, W. Glenn, C. Holton, SID 97 Digest, pg 669-772, May 1997 | | |
| “Exploratory Development of a New Influence Technique for a Torpedo Warhead Exploder”, NSWC/WOL/TR-75-143, October 1975 (co-author) | | |
| “Far Infrared Tuneable Laser (FITL)”, United Technologies Research Center (internal document), East Hartford, CT, 1986 (co-author) | | |
| “Fiber Optic Techniques”, NSWC/WOL/X-141, May 1975 (primary author) | | |
| “Fiber Optics in Meteorological Instrumentation Suites”, C. Holton, M.J. Parker, SPIE Proceedings, Vol 3860-13, Boston, September 1999 | | |
| “High Performance Optical Fiber-Based Meteorological Sensors”, Beaubien, M., Holton, C., Final Report, Office of Naval Research SBIR Program (Ferek, R., Code 032), Contract #N00014-01-C-0403, April, 2004 | | |
| “High Temperature Optical Fiber Sensors”, R.O. Claus, C. Holton, Program Report # NND04GR04G (NASA Dreyden Space Flight Center, Edwards, CA), Virginia Polytechnic & State University, Blacksburg, VA, 12/9/04 | | |
| “High-Efficiency Light Valve Projectors and High-Efficiency Laser Light Sources”, W. Glenn, C. Holton,SMPTE Journal, Volume 106, Number 4, April, 1997
| | |
| “Laser-based electronic displays”, W. Glenn, C. Holton, G. Dixon, SPIE Proceedings, Vol. 3010, p. 21-26, May, 1997 | | |
| “Liquid-Crystal Projector Programs”, C. Holton, W. Glenn, G.J. Dixon, B. Smith, ARPA Information Exchange Conference, Key Bridge Marriott, Washington DC., April 17, 1996 | | |
| “Liquid-Crystal Projector Programs”, C. Holton, W. Glenn, G.J. Dixon, B. Smith, ARPA Information Exchange Conference, Key Bridge Marriott, Washington DC., May 2, 1995 | | |
| “Low Noise Single Frequency Linear Fibre Laser”, G. Ball, C. Holton, G. Hull-Allen, W. Morey, Electronics Letters, Vol 29 Number 18, 2nd September, 1993 | | |
| “Microprocessor Based Dropout Correction for Acoustic Wave Height Gauges”, Proceedings of the 19th American Towing Tank Conference, Ann Arbor, MI, July 1980 | | |
| “Modified CO2 Laser Radar System (MCOOLRS)”, United Technologies Research Center (internal documents), East Hartford, CT, 1987 - 1989 (co-author) | | |
| “Multifunction, EO Meteorological Instruments with Inherent Cross-Platform Capabilities”:, Beaubien, M., Holton, C., Parker, M., Final Report-Phase I, Office of Naval Research SBIR Program (Ferek, R., Code 032), Contract #N054-028-0451-1777, March, 2006 | | |
| “Optical Air Data System (OADS), Prototype Handbook”, United Technologies Optical Systems (internal documents), West Palm Beach, FL, 1987 - 1989 (co-author) | | |
| “Optical Fiber Humidity Sensor Formed by the Ionic Self-Assembly Monolayer Process”, F.J. Arregui, Y. Liu, K. Lenahan, C. Holton, I.R. Matias, R.O. Claus, Proc. SPIE, Vol. 3670, Newport Beach, CA (March 1999). | | |
| “Optical Fiber Humidity Sensor Formed by the Ionic Self-Assembly Monolayer Process”, F.J Arregui, R. Claus, C. Holton, et. al., Optical Fiber Sensors Conference, Komju, Korea, April 1999 | | |
| “Optical Fiber Humidity Sensor using a Nano-Fabry-Perot Cavity Formed by the Ionic Self-Assembly Method”, F.J Arregui, , Liu, R.O. Claus, C. Holton, et. al., Sensors and Actuators B, Chemical, December, 1998 | | |
| “Optical Fiber Magnetic Field Sensors and Signal Processing for Vehicle Detection and Classification”, I.A. Kostic, C. Holton, R.O. Claus, SPIE, Vol 3525B-42, Boston, Nov 1998. | | |
| “Optical Properties of Quantum dots Entrained in Microstructured Optical Fibers”, K. Meissner, C. Holton, Quantum dots 2004, TP36, Banf, Alberta, Canada, May, 2004 | | |
| “Patterned Alignment, Liquid Crystal Diffractive Spatial Light Modulators & Devices”, C. Holton, W. Glenn, P Bos, M. Miller, SPIE Proceedings, Vol. 3292-04, January 1998 | | |
| “Performance of Optical Fiber Sensors Embedded in Polymer Matrix Composites for Fifteen Years”, R.O. Claus, C. Holton, W. Zhao, SPIE Smart Materials Conference, San Diego, March 1998. | | |
| “Preliminary Results, Locked Wheel Detection Tests”, C. Holton, Union Pacific Railroad,Omaha, NB, 6/19/07 | | |
| “RF Receiver/Spectrum Analyzer Subsystem for Wide Bandwidth Optical Air Data System (OADS)”, United Technologies Optical Systems (internal document), West Palm Beach, FL, Jan 1992 | | |
| “Simple Optical Fiber Doppler Sensors for Measurements of Rail Friction”, Holton, C., Ahmadian, M., Rail Technology Laboratory, VA Tech., for Transportation Technology Center Inc., American Association of Railroads, Jan 2005-May 2006. | | |
| “Summary Report on Vision Oriented Printed Circuit Board Inspection System (VORBIS)”,United Technologies Optical Systems (internal document), West Palm Beach, FLS, Jan. 1991 | | |
| “System Development Description, Portable Field Laser System (PFLS)”, United Technologies Optical Systems (internal document), West Palm Beach, FL, Dec. 1989 (co-author) | | |
| “Targeting Systems Study in Support of the Joint Effects Targeting System (JETS) System Tradeoff Study”, Gorschboth, M., Zimmerman, S., Holton, C., Dahlgren Division, Naval Surface Warfare Center (Code G72) for Marine Corp System Command, August, 2005. | | |
| “Transient Wave Generation Technique and Some Engineering Applications”, J. Salsich, B. Johnson, C. Holton, Proceedings of the 20th American Towing Tank Conference, Hoboken, NJ July 1983 | | |
| “Use of an Eye-Safe, Portable Lidar for Remote Wildland Fire and Smoke Detection”, M.J.Parker, C. Holton, 2nd Symposium on Lidar Atmospheric Applications, 85th Annual Meeting of the American Meteorological Society, San Diego, CA, January 2005 | | |
| “Use of an Eye-Safe, Portable Lidar for Remote Wildland Fire and Smoke Detection”, M.J.Parker, C. Holton, 2nd Symposium on Lidar Atmospheric Applications, 85th Annual Meeting of the American Meteorological Society, San Diego, CA, January 2005 | | |
| “Utilization of Optical Fiber & Lidar Concepts in Burn Detection and Rate Measurement”s, C. Holton, M. Parker , Fire Science Laboratory Presentation, May, 2003 | | |
| “Yb-Doped Polarization-Maintaining Double-Cladding Optical Fiber for High-Power Amplifiers”, J. Greene, C. Rose, D. Kominsky, C. Holton, R. Stolen, Optics in the Southeast, SE05-05, OSA Regional meeting, Oct 6, 2001 | | |
